0
0

Redding .361 Titanium Nitride Neck Sizing Bushing (76361)

UPC: 611760763618

$34.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Redding's .361 Titanium Nitride neck sizing bushing, part number 76361. It drops into any Redding bushing style neck die, like the Type S and Competition dies, and gives you the ability to fine tune neck tension instead of settling for whatever a standard die hands you. The .361 size lands squarely in Redding's range of .185 to .368, covering calibers from .17 all the way up to .338, so there's a good chance it's the number you've been chasing for your .35 caliber brass.

What the Titanium Nitride Treatment Does for the 76361

Every Redding bushing starts as heat treated steel, hand polished to a surface hardness of Rc 60 to 62. This TiN version adds a titanium nitride surface treatment on top of that, which bumps the effective surface hardness higher and noticeably reduces sizing friction. In plain terms, the bushing slides over the case neck with less drag, which means less effort at the press and less stress worked into your brass over repeated firings. That slick coating also gives it a distinctive bronze-gold look so you can tell your TiN bushings apart from the plain steel ones at a glance.

Dialing In Neck Tension With the .361 Bushing

The whole point of a bushing die is control. By picking the right bushing, you set just enough neck tension to hold the bullet securely without over-working the brass. The common method is to measure the outside neck diameter of a loaded round with a micrometer or good caliper, then subtract about .001 to .002 for brass spring-back. Most handloaders like to keep a few neighboring sizes on hand so they can experiment and see what shoots best in their rifle. These bushings run 1/2 inch O.D. by 3/8 inch long and are clearly marked with the size, so there's no guessing once they're in the drawer.

Fitment Notes on the Redding .361 TiN Bushing

These interchange freely across all Redding bushing style neck sizing dies, and they'll also fit many other dies built to accept L.E. Wilson style bushings, including certain RCBS and Hornady setups. Made in the USA by one of the most respected names in precision reloading.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 76361
  • UPC: 611760763618
  • Bushing Diameter: .361 in
  • Type: Neck Sizing Bushing
  • Surface Treatment: Titanium Nitride (TiN)
  • Base Material: Heat-Treated Steel
  • Base Surface Hardness: Rc 60-62
  • Dimensions: 1/2 in O.D. x 3/8 in long
  • Quantity: 1
  • Country of Origin: USA

What’s Included

  • One (1) Redding .361 Titanium Nitride neck sizing bushing (76361)

Frequently Asked Questions

What dies does the Redding .361 Titanium Nitride bushing fit?

It interchanges freely across all Redding bushing style neck sizing dies, including the Type S and Competition neck dies. It will also work in many other dies designed to accept L.E. Wilson style bushings, such as certain RCBS and Hornady setups. The die and shellholder are sold separately.

How do I know if .361 is the right bushing size for my brass?

Measure the outside neck diameter of a loaded round with a micrometer or quality caliper, then subtract about .001 to .002 to account for brass spring-back. If that math lands you near .361, this is your bushing. Many handloaders keep a couple of neighboring sizes on hand to fine tune neck tension for their specific rifle and brass.

What is the difference between the Titanium Nitride bushing and the plain steel one?

Both start as the same heat-treated steel, hand polished to a surface hardness of Rc 60 to 62. The Titanium Nitride version adds a TiN surface treatment that increases the effective hardness and reduces sizing friction even further. That means smoother sizing strokes and less stress on your brass, plus the distinctive bronze-gold finish that sets the TiN bushings apart.

Does neck wall thickness matter when using this bushing?

Yes. Bushing dies work best when your case necks have fairly uniform wall thickness or have been neck turned. If your necks vary by more than a couple thousandths, you may want to size down a bit smaller and use the die's expander to even out tension. Sorting brass by lot and checking neck uniformity goes a long way toward consistent results.

Additional information

UPC

611760763618

Manufacturer

Manufacturer Part Number

76361

Reviews

There are no reviews yet.

Be the first to review “Redding .361 Titanium Nitride Neck Sizing Bushing (76361)”