0
0

Redding Titanium Nitride Neck Sizing Bushing .284 (76284)

UPC: 611760762840

$34.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Handloaders chasing consistent neck tension know the bushing is where a lot of the magic happens, and Redding's .284 Titanium Nitride bushing is built to deliver that repeatability every time you run a case. It starts as heat-treated steel polished to a surface hardness around Rc 60-62, then gets a Titanium Nitride surface treatment that bumps effective hardness up to roughly Rc 85 while cutting down on the drag your brass feels going through the neck. That combination means smoother strokes on the press, less effort, and sizing you can count on load after load.

Why the .284 Titanium Nitride Bushing Earns Its Keep

The TiN coating is more than a shiny finish. The added lubricity reduces sizing friction, which is a real advantage when you're working brass neck after neck and want the same feel and the same result. The bushing carries a .284 inside diameter and is clearly marked with its size, so you always know what you've got on the bench. Lubrication is still recommended to keep things running clean and consistent.

Fitment and Interchangeability of the Redding TiN Bushing

This bushing shares the standard Redding external footprint of 1/2 inch outside diameter by 3/8 inch long, so it drops freely into any Redding bushing-style sizing die. Redding bushings also interchange with L.E. Wilson style bushings and fit a variety of bushing dies from other makers that accept that pattern, which makes building out a set a lot easier. Redding offers these in .001 inch increments across the range, covering calibers from .17 through .338, so you can dial in exactly the neck tension your load wants.

If you're reloading rounds in the 7mm family or any cartridge that calls for a .284 neck dimension, this is the bushing that lets you fine-tune tension without guesswork. Made in the USA and built to Redding's precision standard, it's a small part that makes a noticeable difference in the quality of your ammo.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 76284
  • UPC: 611760762840
  • Type: Neck Sizing Bushing
  • Inside Diameter: .284 in
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Material: Heat-treated steel with Titanium Nitride surface treatment
  • Base Hardness: Approx. Rc 60-62
  • Effective Surface Hardness: Approx. Rc 85
  • Compatibility: Redding bushing-style dies and L.E. Wilson style bushing dies
  • Country of Origin: USA

What’s Included

  • One Redding .284 Titanium Nitride neck sizing bushing (76284)

Frequently Asked Questions

What dies does the Redding .284 Titanium Nitride bushing fit?

It fits all Redding bushing-style sizing dies thanks to its standard 1/2 inch outside diameter by 3/8 inch length. It also interchanges with L.E. Wilson style bushings and works in other brands' dies that accept that same pattern. That flexibility makes it easy to use across different setups on your bench.

What's the difference between the Titanium Nitride bushing and the plain steel version?

Both start as heat-treated steel polished to around Rc 60-62 and share identical external dimensions. The Titanium Nitride version adds a surface treatment that raises effective hardness to roughly Rc 85 and increases lubricity, which reduces sizing friction. In practice that means smoother, more consistent strokes when you're sizing necks.

How do I pick the right bushing size for my brass?

The common method is to measure the neck diameter of a loaded round, then subtract the amount of neck tension you want, usually a few thousandths. That number is the bushing ID you'd order. Redding makes these in .001 inch increments, so you can get precise about the tension your load prefers.

Do I still need to lubricate when using a Titanium Nitride bushing?

Yes, lubrication is still recommended even with the TiN coating. The coating lowers friction and adds hardness, but a bit of case lube keeps the process smooth and protects your brass. It's a simple step that helps everything run clean and consistent.

Additional information

UPC

611760762840

Manufacturer

Manufacturer Part Number

76284

Reviews

There are no reviews yet.

Be the first to review “Redding Titanium Nitride Neck Sizing Bushing .284 (76284)”