0
0

Redding Titanium Nitride Neck Sizing Bushing .271 | 76271

UPC: 611760762710

$34.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck tension is one of those little details that separates good handloads from great ones, and the Redding Titanium Nitride Bushing in .271 lets you control it with real precision. These bushings are built from heat-treated hardened steel, then given a titanium nitride surface treatment that bumps up the surface hardness and smooths out the sizing stroke. The result is a bushing that works your brass just enough to hold the bullet securely without stretching and tiring the neck.

How the .271 TiN Bushing Dials In Your Loads

Picking the right bushing is simple once you know the trick. Measure the outside neck diameter of a loaded cartridge with a good micrometer, then subtract about .001 to .002 inches to account for brass spring-back and bullet grip. That number is your bushing size. With this .271 on the bench, you get consistent, repeatable neck tension that pays off in tighter groups and more uniform seating.

Fit and Build of the Redding Titanium Nitride Bushing

This bushing carries the standard Redding external dimensions of 1/2 inch outside diameter by 3/8 inch long, so it drops right into any Redding bushing-style neck sizing die, including the Type S Full and Neck Sizing dies. It's clearly marked with its size ID so you'll never second-guess which one you grabbed. The sizing surface is hand-polished to a surface hardness in the Rc 60 range, and the TiN coating adds extra lubricity that reduces how hard you have to pull on the press handle.

Where the .271 Bushing Earns Its Keep

Redding offers bushings in .001 inch increments across the .185 to .368 range, covering calibers from .17 all the way up to .338. The .271 sits in the family that serves 6.8mm and 9.3mm applications depending on your brass and neck wall thickness. Made in the USA, this is the kind of small, well-made tool that precision handloaders keep a drawer full of so they can fine-tune tension load by load.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 76271
  • UPC: 611760762710
  • Bushing Diameter: .271 inch
  • Type: Titanium Nitride (TiN) Neck Sizing Bushing
  • Material: Heat-treated hardened steel with TiN coating
  • Surface Hardness: Rc 60 range, hand-polished
  • External Dimensions: 1/2 inch O.D. x 3/8 inch long
  • Compatibility: Redding bushing-style neck sizing dies, including Type S
  • Caliber Range Covered: .17 to .338 (full bushing line)
  • Country of Origin: USA
  • Quantity: 1 bushing

What’s Included

  • One Redding .271 Titanium Nitride neck sizing bushing

Frequently Asked Questions

How do I know if the .271 bushing is the right size for my cartridge?

Measure the outside neck diameter of a loaded round using a precision micrometer, then subtract about .001 to .002 inches to allow for brass spring-back and bullet tension. If that math lands on .271, this is your bushing. Keeping a couple of sizes on hand is smart so you can fine-tune tension as your brass and bullets change.

What dies will this Redding Titanium Nitride bushing fit?

It shares Redding's standard external dimensions of 1/2 inch outside diameter by 3/8 inch long, so it interchanges freely in all Redding bushing-style neck sizing dies, including the Type S Full and Neck Sizing dies. It also works with most popular bushing-style dies on the market.

What's the difference between the titanium nitride and steel bushings?

Both styles start as heat-treated hardened steel and share the same dimensions and fitment. The titanium nitride version adds a TiN surface treatment that increases surface hardness and adds lubricity, which reduces sizing friction and makes the press stroke noticeably smoother.

Does this bushing come with a die or shellholder?

No, this is the bushing only. The sizing die and shellholder are sold separately, so you'll want a Redding bushing-style neck or full-length sizing die to drop it into.

Additional information

UPC

611760762710

Manufacturer

Manufacturer Part Number

76271

Reviews

There are no reviews yet.

Be the first to review “Redding Titanium Nitride Neck Sizing Bushing .271 | 76271”