Description
This is the .255 diameter Titanium Nitride neck sizing bushing from Redding, part number 76255. It's the key piece that lets you set precise neck tension in a bushing-style die instead of relying on a one-size-fits-all expander. The bushing itself is heat treated steel that's been hand polished to a surface hardness of Rc 60 to 62, then given a titanium nitride surface treatment that bumps the hardness even higher and slicks things up so brass slides through with less effort.
Why the .255 Redding TiN Bushing Earns Its Keep
The whole point of a bushing die is control. By picking the bushing that matches your brass, you size the neck just enough to hold the bullet without overworking it. Less overworking means less case stretch, fewer trimmings, and brass that stays consistent load after load. The titanium nitride coating is what sets this version apart from the plain steel bushings, giving you a slicker pass that's especially nice if you're running a lot of cases or working harder brass.
Picking the Right Size Bushing
Sizing is simple once you know the trick. Measure the outside neck diameter of a loaded round with a good micrometer, then subtract about .001 to .002 inches to account for brass spring back and bullet tension. That number is your bushing. This .255 is one step in a full lineup that runs from .185 through .368 in .001 inch increments, covering calibers from .17 up to .338, and every bushing is stamped with its size so you'll never second guess which one you grabbed.
Fitment and Compatibility
The external dimensions here are standard Redding: 1/2 inch outside diameter by 3/8 inch long. That means it drops straight into any Redding bushing-style neck sizing die, and it also interchanges with Wilson-style bushings, so it plays well with most of the popular bushing dies out there. Made in the USA by a company that's been building serious reloading gear for decades.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76255
- UPC: 611760762550
- Bushing Diameter: .255 in
- Type: Neck Sizing Bushing
- Coating: Titanium Nitride (TiN)
- Material: Heat Treated Steel
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2 in O.D. x 3/8 in long
- Available Size Range: .185 in through .368 in
- Compatibility: Redding bushing-style dies; interchanges with Wilson-style bushings
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One (1) Redding .255 Titanium Nitride neck sizing bushing (76255)
Frequently Asked Questions
What dies does the Redding .255 Titanium Nitride bushing fit?
It fits any Redding bushing-style neck sizing die and drops right in thanks to the standard 1/2 inch O.D. by 3/8 inch long dimensions. It also interchanges with Wilson-style bushings, so it works with most of the popular bushing dies on the market.
How do I know if .255 is the right bushing size for my load?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inches to allow for brass spring back and bullet tension. If that math lands on .255, this is your bushing. Keep in mind neck tension can be tuned, so some reloaders keep a couple of sizes on hand to experiment.
What's the difference between the titanium nitride and plain steel Redding bushings?
Both start as the same heat treated steel with the same external dimensions and interchangeability. The titanium nitride version adds a surface treatment that raises the effective hardness and reduces sizing friction, so brass passes through with a bit less effort. It's a nice upgrade if you size a lot of cases or work harder brass.
Will using this bushing help my brass last longer?
That's the main appeal of bushing-style sizing. By choosing the exact bushing for your neck, you size just enough to hold the bullet without overworking the brass, which cuts down on case stretch and keeps necks more consistent. Less overworking generally means more reloads out of the same cases.




Reviews
There are no reviews yet.