Description
This is the .235 diameter version of Redding's Titanium Nitride neck sizing bushing, part number 76235. It's a precision-ground insert that drops into any Redding bushing-style neck or full-length die and lets you fine-tune how much your case necks get squeezed down. Instead of oversizing the neck and then dragging it back open over an expander ball, a bushing sizes it to just the number you pick, which keeps brass working less and necks running concentric.
What the .235 TiN Bushing Brings to the Bench
The titanium nitride surface treatment is the headline here. Redding builds these from heat-treated steel hand polished to around Rc 60-62, then adds the TiN coating to push surface hardness even higher and cut sizing friction. That bronze-gold finish you see isn't just for looks. It means a smoother stroke on the press and a bushing that holds its dimension over a long service life, which matters when you're chasing repeatable neck tension.
Picking the Right Redding Bushing Size
The .235 refers to the inside sizing diameter in thousandths. To figure out your number, measure the outside neck diameter of a loaded round with the same brass you plan to reload using a precision micrometer, then subtract .002. That leaves roughly .001 of spring-back and sets you up with proper neck tension to hold the bullet without overworking the case. Many handloaders keep a couple of bushings on hand for a single caliber since neck wall thickness varies between brass brands, and a .001 difference changes how the round holds the bullet.
Wide Compatibility Across Bushing Dies
Every bushing in this line shares the same external dimensions, 1/2 inch outside diameter by 3/8 inch long, so they interchange freely in Redding bushing-style dies. They also drop into other Wilson-style bushing dies from brands like RCBS and Hornady, which makes a set of these a flexible addition to a precision reloading setup. Each one is clearly marked with its size for easy sorting in the die box.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76235
- UPC: 611760762352
- Type: Titanium Nitride Neck Sizing Bushing
- Sizing Diameter: .235 in
- Outside Diameter: 1/2 in
- Length: 3/8 in
- Material: Heat-treated steel with Titanium Nitride (TiN) coating
- Base Surface Hardness: Rc 60-62 (hand polished)
- Finish: Titanium Nitride (bronze/gold)
- Quantity: 1 bushing
- Compatibility: Redding bushing-style dies and Wilson-style bushing dies
- Country of Origin: USA
What’s Included
- One (1) Redding .235 Titanium Nitride neck sizing bushing (76235)
Frequently Asked Questions
How do I know if the .235 Redding bushing is the right size for me?
Measure the outside neck diameter of a loaded round using the same brass you plan to reload, then subtract .002 to allow for brass spring-back. If that math lands you at .235, this is your bushing. Keep in mind neck wall thickness varies between brass brands, so it's common to own a couple of bushings a thousandth or two apart for the same caliber.
Will this titanium nitride bushing fit my die?
It fits all Redding bushing-style neck sizing and full-length dies, since every bushing in the line shares the same 1/2 inch outside diameter by 3/8 inch length. It also interchanges with Wilson-style bushing dies from brands like RCBS and Hornady. The die and bushing are sold separately, so you'll need a bushing-style die to use it.
What's the difference between the titanium nitride and plain steel Redding bushings?
Both start as the same heat-treated steel hand polished to Rc 60-62 and will size your necks to the same diameter. The titanium nitride version adds a TiN coating that raises surface hardness even further and reduces friction during sizing. That means a slicker stroke on the press and strong wear resistance over time.
Can I use one bushing to adjust neck tension, or do I need several?
A single bushing gives you one fixed amount of neck tension. Since bushings come in .001 increments, many reloaders buy a few in a small range to experiment with tension until groups tighten up. Dropping or raising the bushing size by a thousandth is the usual way to tune for your rifle, brass, and whether you're hunting or shooting targets.





Reviews
There are no reviews yet.