0
0

Redding Titanium Nitride Neck Sizing Bushing .226 (76226)

UPC: 611760762260

$34.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Dialing in neck tension is one of the quickest ways to tighten up groups, and this Redding .226 Titanium Nitride bushing lets you do it with precision. It's built from heat treated steel and then given a Titanium Nitride surface treatment, which bumps up the surface hardness and cuts down on sizing friction. The result is a smoother stroke on the press and brass that gets worked less, so your cases last longer and your necks stay more uniform load after load.

Where the .226 TiN Bushing Fits

These bushings share standard external dimensions of 1/2 inch outside diameter by 3/8 inch long, so they drop straight into any Redding bushing-style neck sizing die and interchange freely with Wilson-style bushings too. Each one is clearly marked with its size, in this case .226, so there's no guesswork when you're swapping bushings between calibers at the bench. If you already run Redding Type S dies or a Wilson setup, this one plugs right in.

Picking the Right Redding Bushing Size

Getting the correct diameter is simple. Measure the outside neck diameter of a loaded cartridge with a good micrometer, then subtract about .002 inch to account for brass spring-back. That gives you the right press fit on the bullet without over-working the neck. For brass with uneven neck wall thickness, some reloaders go a couple thousandths smaller and finish with a sizing button. Redding offers these in .001 inch increments across the full range, so you can fine-tune neck tension to exactly what your load wants.

What the TiN Coating Buys You

Redding bushings are hand polished and run a surface hardness in the Rc 60-62 range to keep sizing effort low. The Titanium Nitride treatment adds even more lubricity on top of that, which handloaders chasing consistency really appreciate. Less friction means a more repeatable stroke, and a more repeatable stroke means more consistent neck tension round to round. It's a small part that makes a real difference once you start measuring your results.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 76226
  • UPC: 611760762260
  • Type: Titanium Nitride Neck Sizing Bushing
  • Bushing Diameter: .226 in
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Material: Heat treated steel with Titanium Nitride coating
  • Surface Hardness: Rc 60-62
  • Finish: Titanium Nitride (bronze)
  • Compatibility: Redding bushing-style dies and Wilson-style bushings
  • Size Increments Offered: .001 in

What’s Included

  • One Redding .226 Titanium Nitride neck sizing bushing

Frequently Asked Questions

What size bushing do I need and how do I figure it out?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .002 inch to allow for brass spring-back. That number is the bushing diameter you want for a proper bullet fit. This .226 bushing works well when your measured and adjusted figure lands at .226. If your brass has uneven neck wall thickness, you may want to go a couple thousandths smaller and finish with a sizing button.

Will the Redding .226 Titanium Nitride bushing fit my dies?

Yes. It uses the standard 1/2 inch outside diameter by 3/8 inch long dimensions, so it drops into any Redding bushing-style neck sizing die. It also interchanges freely with Wilson-style bushings, so you're covered if that's your setup.

What's the advantage of the Titanium Nitride version over the plain steel bushing?

Both start as the same hand polished, heat treated steel with a surface hardness in the Rc 60-62 range. The Titanium Nitride coating adds surface hardness and lubricity on top of that, which reduces sizing friction. That means a smoother, more repeatable press stroke and less wear on your brass over time.

Can one bushing handle slightly different neck tension?

Each bushing is a fixed diameter, so it produces a set amount of neck tension for a given case. If you want to experiment with tighter or looser tension, Redding offers these in .001 inch increments, so many reloaders keep a few adjacent sizes on hand. Stepping up or down a thousandth is the usual way to tune your load.

Additional information

UPC

611760762260

Manufacturer

Manufacturer Part Number

76226

Reviews

There are no reviews yet.

Be the first to review “Redding Titanium Nitride Neck Sizing Bushing .226 (76226)”