Description
Redding has been quietly building body dies for the benchrest crowd for decades, long before they showed up in a catalog. This 300 PRC version is the real deal for anyone running bushing neck-sizing dies who wants a clean, controlled way to work the case body without undoing all that careful neck work. It full length resizes the body and sets the shoulder back for proper headspace, so brass that's gotten tight after a few firings slides right back into the chamber.
What the 300 PRC Body Die Actually Does
Think of this as the problem-solver in your die rack. After several firings and neck sizing, 300 PRC brass tends to grow at the body and shoulder, and that's when cases start to drag or hang up on close bolt. This die squeezes the body back to spec and bumps the shoulder the exact amount you dial in by adjusting the die's position relative to the shellholder. The neck is left completely alone, keeping the tension and concentricity you built with your bushing die.
Built Simple On Purpose
There are no moving internal parts in this body die, which is exactly why it works so well. No expander ball, no decapping pin, nothing to pull on the neck or throw off alignment. It threads into any standard press with the 7/8-14 thread and takes the standard #6 shellholder for the 300 PRC case. The die is machined to Redding's usual tight tolerances, so you get repeatable shoulder bump load after load, which is what matters when you're chasing consistency over a chronograph.
For precision reloaders running the 300 PRC in a long-range rig, this die rounds out a neck-sizing setup and stretches case life by letting you minimize how much you work the brass. Pair it with a datum or headspace gauge and you can measure your bump precisely instead of guessing, which is how you keep groups tight and brass lasting.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number (MPN): 75776
- UPC: 611760757761
- Cartridge: .300 PRC
- Die Style: Body Die
- Function: Full length body resize and shoulder bump, does not size the neck
- Internal Parts: None (no expander or decapping assembly)
- Thread: 7/8-14
- Bullet Diameter: 0.308 in
- Shellholder: Standard #6 (sold separately)
- Material: Steel
- Origin: Made in USA
What’s Included
- One Redding 300 PRC Body Die
- Lock ring
- Instructions
Frequently Asked Questions
What does the Redding 300 PRC Body Die do that a full length sizing die doesn't?
A body die resizes only the case body and bumps the shoulder for proper headspace, while leaving the neck completely untouched. A standard full length die sizes the neck too, usually with an expander ball running through it. If you neck size with a bushing die, the body die is the companion that handles the body work without disturbing your neck tension.
Does this die resize or decap the case neck?
No. The 300 PRC Body Die is made without any internal parts, so there's no decapping pin or expander ball. It works the body and shoulder only, which is exactly why it keeps your neck sizing intact.
What shellholder do I need for the 300 PRC Body Die?
The .300 PRC uses a standard #6 shellholder. It's not included with the die, so you'll want to grab one separately if you don't already have it in your kit.
How do I control how much shoulder bump I get?
You control the bump by adjusting the die's position relative to the shellholder, just like a conventional sizing die. Running a datum or headspace comparator gauge makes it easy to measure and dial in the exact amount, which helps with consistent chambering and longer case life.




Reviews
There are no reviews yet.