Description
The Redding Small Base Body Die in .308 Winchester handles one specific job and does it well: full length resizing the case body and setting the shoulder back for proper chambering, while leaving the neck completely alone. It squeezes the brass down to minimal dimensions, which makes it the right tool when you're loading for a rifle with a chamber cut tighter than standard spec, or when cases have gotten tough to chamber after a bunch of firings and neck-only sizing.
This one works nicely as a companion to Redding's bushing-style neck sizing dies. The idea is simple: you control neck tension with a separate neck die, and you use this body die to get the case body and shoulder back in line without reworking the neck geometry you've already dialed in. Since it only sizes the body and shoulder, there's no decapping rod and no internal moving parts to fuss with.
Dialing In Shoulder Bump With The Small Base Body Die
Shoulder bump is controlled the same way it is with any sizing die, by adjusting the die's position relative to the shellholder. A datum gauge or comparator takes the guesswork out of setting your headspace, and Redding Competition Shellholders give you even finer control over exactly how much the shoulder moves. Go slow, measure as you go, and you'll land on cases that drop in clean every time.
Who Reaches For This .308 Small Base Body Die
This is a specialty die, not an everyday full length sizer. It shines for precision and benchrest loaders running tight or custom chambers, and for anyone picking up once-fired brass that was shot in a generous chamber and now needs to be brought back to minimal dimensions. Built from steel and made in the USA, it's the kind of tool you buy once and keep on the bench for years. Pair it with a quality neck die and you've got a flexible, accuracy-minded sizing setup for your .308.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 74155
- UPC: 611760741555
- Cartridge: .308 Winchester / 7.62x51mm
- Die Type: Small Base Body Die
- Function: Full length sizes case body and bumps shoulder, does not size neck
- Material: Steel
- Internal Parts: None (no decapping rod)
- Quantity: 1 die
- Country of Origin: United States
What’s Included
- One Redding Small Base Body Die with lock ring
- Die storage box
- Instructions
Frequently Asked Questions
What does the Redding Small Base Body Die do differently from a regular full length sizer?
This body die full length sizes the case body and bumps the shoulder back, but it does not touch the case neck. It also sizes the base down to minimal dimensions, making it ideal for custom chambers cut tighter than standard spec. Because it skips the neck, you handle neck tension separately with a neck or bushing die.
Do I need a separate die to size the case neck?
Yes. The Small Base Body Die only sizes the body and shoulder, so you'll want a companion neck die to complete the job. It was designed to pair with Redding's bushing-style neck sizing dies, which lets you control neck tension independently of body sizing.
Is a shellholder included with the 74155 body die?
No, the shellholder is sold separately. Many reloaders pair this die with Redding Competition Shellholders for precise control over shoulder bump. Standard .308 Winchester shellholders will also work.
When should I use a small base die instead of a standard body die?
Reach for the small base version when you're loading for a tighter-than-standard or custom chamber, or when brass has become difficult to chamber after repeated firings and neck sizing. It squeezes the case base and body down further than a standard die. If your brass chambers fine from a standard full length sizer, you likely don't need the small base version.




Reviews
There are no reviews yet.