0
0

Redding 73 Style Steel Neck Sizing Bushing .364 (73364)

UPC: 611760733642

$20.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .364 diameter bushing from Redding's 73 Series of heat-treated steel neck sizing bushings, part number 73364. If you're running a Redding bushing-style die, this is the piece that does the real work, letting you control exactly how much your case necks get squeezed down instead of leaving it up to a one-size-fits-all die. The whole idea behind bushing dies is precision, and swapping in the right bushing is how you get there.

What the .364 Redding Steel Bushing Does for Your Loads

Instead of oversizing the neck and then dragging it back open with an expander, you pick a bushing that sizes the neck to just the right spot. That means less brass working, longer case life, and more consistent neck tension round to round. To find your size, you measure the outside neck diameter of a loaded cartridge and subtract about a thousandth. Running moly-coated bullets? You may want to go a touch tighter, a thou or two under.

Build and Fitment of the 73 Style Steel Bushing

These are made from heat-treated steel with sizing diameters that are hand-polished to a surface hardness of Rc 60-62, which keeps sizing effort down and wear way out in the future. Every bushing in the line shares the same external dimensions, 1/2 inch outside diameter by 3/8 inch long, so they freely interchange across all of Redding's bushing-style neck sizing dies. The full steel range covers .185 inch through .368 inch in .001 inch steps, and each one is clearly marked with its size so you're never guessing which is which at the bench.

The .364 is a common pick for larger calibers in the .338 family and similar necks. If you shoot anything precision-minded and want to fine-tune neck tension without buying a whole new die, keeping a few bushings on hand around your target size is the smart move. Grab a couple sizes close to your measurement so you can test and settle on what shoots best in your rifle.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73364
  • UPC: 611760733642
  • Bushing Diameter: .364 in
  • Style: 73 Series Heat-Treated Steel
  • Outside Diameter: 1/2 in
  • Length: 3/8 in
  • Surface Hardness: Rc 60-62
  • Material: Heat-treated steel, hand-polished
  • Available Range: .185 in to .368 in in .001 in increments
  • Compatibility: All Redding bushing-style neck sizing dies
  • Quantity: 1 bushing

What’s Included

  • One Redding 73 Style .364 steel neck sizing bushing

Frequently Asked Questions

What dies does the Redding .364 steel neck bushing fit?

It freely interchanges in all of Redding's bushing-style neck sizing dies, including the Type S line. Every bushing in the 73 series shares the same 1/2 inch outside diameter by 3/8 inch length, so fitment is the same across the range. Just drop it into your bushing die and you're set.

How do I know if .364 is the right bushing size for me?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 inch to get your starting bushing size. If you shoot moly-coated bullets, you may want to go a thousandth or two tighter. It's common to keep a couple of neighboring sizes on hand to test what gives the best accuracy in your rifle.

What's the difference between the steel 73 bushing and the titanium nitride version?

Both styles share identical external dimensions and interchange in the same dies. This is the heat-treated steel version, hand-polished to Rc 60-62 hardness to keep sizing effort low. The titanium nitride bushings (76 series) add a coating for even slicker sizing, but the steel bushings handle precision neck sizing just fine.

Does using a Redding bushing help brass last longer?

Yes. By sizing the neck to just the amount you need, a bushing avoids the over-working and re-expanding that standard dies do. Less brass movement means less work hardening and longer case life, plus more consistent neck tension from one round to the next.

Additional information

UPC

611760733642

Manufacturer

Manufacturer Part Number

73364

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .364 (73364)”