Description
Neck tension is one of those details that separates good handloads from great ones, and a quality bushing is how you control it. This Redding steel neck sizing bushing measures .331 inch and is built from heat treated steel that's hand polished to a surface hardness of Rc 60-62, which keeps sizing effort low and extends the working life of the bushing. If you're chasing tighter groups and more consistent velocities, controlling how much you squeeze that case neck is where a lot of the magic happens.
How the .331 Redding Bushing Fits Your Setup
These bushings freely interchange across Redding's Type S and Competition bushing style neck sizing dies, so you can swap diameters in seconds without buying a whole new die. The standard external dimensions are 1/2 inch outside diameter by 3/8 inch long, and each bushing is marked with its size so you always know what you're grabbing out of the box. Redding offers the full lineup in .001 inch increments, which means you can fine tune neck tension to match your exact brass and bullet combo.
Picking the Right Bushing Size
The reliable way to land on the correct size is to seat a bullet in a case of the brass you plan to load, then measure the outside diameter of that loaded neck with a micrometer or caliper. From there, subtract about .001 to .002 inch to allow for brass spring back and give the bullet proper grip. Folks running moly coated bullets sometimes go a touch tighter. The .331 is a popular choice among .308 Winchester and other .30 caliber handloaders depending on their brass thickness, though your own measurement is always the final word.
Why Handloaders Reach for Redding Bushings
Running a bushing die lets you skip the traditional expander ball and size the neck exactly where you want it, which is easier on your brass and helps with runout and concentricity. A light pass of case lube keeps things sliding smoothly. It's a small part that punches well above its weight when you're building precision ammo.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73331
- UPC: 611760733314
- Bushing Diameter: .331 inch
- Material: Heat Treated Steel
- Surface Hardness: Rc 60-62, hand polished
- External Dimensions: 1/2 inch O.D. x 3/8 inch long
- Compatibility: Redding Type S and Competition bushing style neck sizing dies
- Size Markings: Marked with size identification
- Quantity: 1 bushing
What’s Included
- One Redding .331 heat treated steel neck sizing bushing
Frequently Asked Questions
What dies does the Redding .331 steel bushing fit?
It drops into any Redding Type S or Competition bushing style neck sizing die. The standard 1/2 inch O.D. by 3/8 inch long format means it interchanges freely, so you can switch sizes without changing out the die itself.
How do I know if .331 is the right bushing size for my brass?
Seat a bullet in the brass you plan to load, then measure the outside diameter of the loaded case neck with a micrometer or caliper. Subtract about .001 to .002 inch from that number to account for brass spring back and bullet grip. Since neck wall thickness varies by brass brand, always measure your own loaded rounds rather than guessing.
What's the difference between the steel bushing and the Titanium Nitride version?
This is the heat treated steel bushing, hand polished to Rc 60-62 for smooth sizing. The TiN coated version adds a titanium nitride surface treatment to further harden the surface and cut sizing friction. The steel bushing performs great with a light coat of case lube and is the go to for many handloaders.
Do I still need an expander when using a Redding bushing?
In most cases, no. One of the big advantages of a bushing die is that it sizes the neck precisely where you want it, so many reloaders remove the decapping rod and expander entirely. This is gentler on your brass and often improves concentricity.



Reviews
There are no reviews yet.