0
0

Redding 73 Style Steel Neck Sizing Bushing .330 (73330)

UPC: 611760733307

$20.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding 73 Style Steel Bushing in .330 is the kind of small part that makes a big difference at the bench. It's a heat-treated steel neck sizing bushing built to control the outside neck diameter of your brass with real precision, letting you set exactly the amount of grip your bullet needs. The sizing surface is hand-polished to a hardness of Rc 60-62, which keeps sizing effort down and gives you the smooth, repeatable results that precision handloaders are after.

Why the Redding .330 Bushing Earns Its Spot

Neck tension is one of those variables that quietly affects accuracy, and swapping bushings is the cleanest way to tune it. By picking the right diameter, you only size the neck as much as you need to hold the bullet, rather than overworking the brass with a standard one-size die. Less working of the brass usually means longer case life and more consistent seating, which is exactly why benchrest and precision rifle folks lean on this system.

How the 73 Style Steel Bushing Fits Your Setup

This bushing uses the standard 73-style dimensions, so it freely interchanges in all Redding bushing-style neck sizing dies and also works with Wilson-style bushings. The part number tells you the size at a glance: the last three digits of 73330 mean a .330 inch diameter. A touch of case lube on the necks keeps things running smoothly and protects the polished finish.

Picking the Right Size

Figuring out which bushing you need is straightforward. Measure the outside neck diameter of a few loaded or dummy rounds with a good micrometer, then subtract about .001 to .002 inch from your smallest average reading. That accounts for brass spring-back and leaves you with a proper press fit on the bullet. If you're between sizes or shooting different brass, a couple of bushings on hand lets you chase the sweet spot.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73330
  • UPC: 611760733307
  • Diameter: .330 in
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62
  • Finish: Hand-Polished Steel
  • Style: 73 Style Neck Sizing Bushing
  • External Dimensions: 1/2 in O.D. x 3/8 in Long
  • Compatibility: Redding Bushing-Style Dies, Wilson-Style Bushings
  • Country of Origin: United States

What’s Included

  • One Redding 73 Style Steel Neck Sizing Bushing, .330 diameter

Frequently Asked Questions

What dies does the Redding 73 Style .330 bushing fit?

It freely interchanges in all Redding bushing-style neck sizing dies, including the Type S line. The external dimensions are the standard 1/2 inch O.D. by 3/8 inch long, so it also works with Wilson-style bushings. The die itself is sold separately.

How do I know if .330 is the right bushing size for my brass?

Measure the outside neck diameter of a few loaded or dummy cartridges with a precision micrometer. Take your smallest average reading and subtract about .001 to .002 inch to allow for brass spring-back and proper bullet tension. That final number should match the bushing diameter you order.

What's the difference between the steel bushing and the titanium nitride version?

Both share the same dimensions and interchange in the same dies, and both are heat-treated steel. The 73 style steel bushing is hand-polished to Rc 60-62, while the titanium nitride version adds a coating that raises surface hardness and reduces sizing friction further. The steel bushing works great with proper case neck lube.

Do I need to lube the case necks when using this bushing?

Yes, a little lube on the case necks is recommended. It keeps sizing effort low, helps protect the polished bushing surface, and gives you smoother, more consistent results. Dry sizing through a bushing can leave drag marks and make the job harder than it needs to be.

Additional information

UPC

611760733307

Manufacturer

Manufacturer Part Number

73330

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .330 (73330)”