Description
This is the .307 diameter steel neck sizing bushing from Redding's 73 Style lineup, and it's one of those small parts that makes a real difference once you start chasing tight, repeatable neck tension. The bushing is made from heat treated steel with sizing diameters that are hand polished to a surface hardness of Rc 60-62, which keeps sizing effort low and leaves your brass necks looking clean. Each one is clearly marked with its size, so there's no guesswork when you're swapping bushings on the bench.
How the Redding .307 Steel Bushing Fits Your Setup
The beauty of the bushing system is flexibility. This .307 bushing freely interchanges in every Redding bushing style neck sizing die, so you can fine tune the amount of neck tension without buying a whole new die. By picking the right bushing diameter, you're sizing only as much as you need to hold the bullet securely, which means less working of the brass and longer case life. Bushings in this family run the full range from .185 through .368 in .001 increments, so stepping up or down a thousandth to tweak tension is easy.
Choosing the Right Redding 73 Style Bushing Size
Getting the size dialed in is straightforward. Measure the outside neck diameter of a loaded round with a quality micrometer, then subtract about .001 to .002 to account for brass springback and the tension you want on the bullet. That's your bushing number. If you're loading with moly coated bullets, a lot of reloaders go a thousandth or two smaller to get the grip they're after.
For precision handloaders working up match ammo or just trying to tighten up group sizes, controlling neck tension this precisely is a big step forward. It's a simple, well made piece of kit that earns its spot in your bushing box.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73307
- UPC: 611760733079
- Style: 73 Style
- Bushing Diameter: .307 in
- Material: Heat Treated Steel
- Surface Hardness: Rc 60-62, hand polished
- Dimensions: 1/2" O.D. x 3/8" long
- Available Size Range: .185 in thru .368 in (.001 in increments)
- Compatibility: All Redding bushing style neck sizing dies
- Quantity: 1 bushing
- Country of Origin: Made in USA
What’s Included
- One Redding 73 Style .307 diameter steel neck sizing bushing
Frequently Asked Questions
What dies does the Redding .307 steel bushing work with?
This bushing freely interchanges in all Redding bushing style neck sizing dies. The standard external dimensions of 1/2 inch O.D. by 3/8 inch long mean it drops right in and swaps out quickly on the bench. You don't need a dedicated die for each diameter, just the bushings you want to run.
How do I know if .307 is the right bushing size for my loads?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inch to allow for brass springback and bullet tension. That number is your ideal bushing size. If you're running moly coated bullets, you may want to go a thousandth or two smaller for proper grip.
What's the difference between the steel bushing and the titanium nitride version?
This is the heat treated steel bushing, hand polished to a surface hardness of Rc 60-62 to reduce sizing effort. The titanium nitride bushings share the same design and dimensions but add a TiN coating that further increases surface hardness and cuts sizing friction. Both interchange in the same dies, so it comes down to preference and budget.
Will this bushing help with case life and neck tension?
Yes. By selecting the correct bushing diameter, you size the neck only as much as needed to hold the bullet securely instead of over working the brass. That controlled neck tension helps extend case life and improves round to round consistency, which is why precision handloaders lean on the bushing system.




Reviews
There are no reviews yet.