Description
The Redding 73 Style .294 Steel Bushing is one of those small parts that makes a real difference once you start chasing precision at the bench. It lets you size the outside of your case neck to a specific diameter instead of over-working the brass with a standard expander, so you get consistent neck tension round after round. That consistency is what shows up on paper and over the chronograph.
What the .294 Steel Bushing Does at the Bench
This is the plain heat-treated steel version, with the sizing diameter hand-polished to a surface hardness of Rc 60-62 to keep sizing effort low and the brass happy. It carries the standard Redding external dimensions of 1/2" outside diameter by 3/8" long, and it's clearly marked with its size so you always know which one is loaded in the die. Because the bushing is free to float, it self-centers on the neck of the case, which helps keep your loaded rounds concentric.
Fitting the Redding 73 Style Bushing to Your Die
These bushings drop straight into any Redding bushing-style neck sizing die, including the Type S and Competition dies, and they interchange freely across that lineup. Redding offers them in .001" increments across the range, so you can fine-tune neck tension rather than settling for whatever a one-size expander gives you. If you run a few different calibers or brands of brass, it's common to keep a small set of sizes on hand.
Picking the Right Bushing Size
The easy way to size up: seat a bullet in a piece of the brass you plan to load, measure the outside neck diameter with a good caliper or micrometer, then subtract about .001". That gives you roughly a thousandth of grip once the brass springs back. If you're running moly-coated bullets or want a touch more tension, some reloaders drop down another .001" to .002" from there.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73294
- UPC: 611760732942
- Bushing Diameter: .294"
- Style: 73 Style Heat-Treated Steel
- Material: Heat-treated steel
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2" O.D. x 3/8" long
- Fitment: Redding Type S and Competition bushing-style dies
- Application: Rifle neck sizing
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One Redding 73 Style .294 heat-treated steel neck sizing bushing
Frequently Asked Questions
Which dies does the Redding 73 Style .294 steel bushing fit?
It fits all Redding bushing-style neck sizing dies, including the Type S and Competition dies. The bushings interchange freely across that lineup, so you can swap sizes in the same die. The shellholder and die itself are sold separately.
How do I know if .294 is the right bushing size for my load?
Seat a bullet in the exact brass you plan to load, then measure the outside diameter of the loaded neck with a caliper or micrometer. Subtract about .001" from that number to get your bushing size. So the .294 bushing is a match when your loaded neck measures around .295".
What's the difference between the steel bushing and the titanium nitride version?
This is the plain heat-treated steel bushing, hand-polished to Rc 60-62 to keep sizing effort low. The titanium nitride version adds a surface coating that further increases hardness and reduces sizing friction. Both share the same dimensions and interchange in the same dies, so it comes down to preference.
Do I still need the expander when running a bushing?
No, a bushing die sizes the neck from the outside to a precise diameter, which does the job the expander normally would. Many reloaders remove the decapping rod and expander when running bushing dies for cleaner, more consistent neck tension. The bushing also floats and self-centers on the neck, which helps with concentricity.




Reviews
There are no reviews yet.