Description
This is the .286 diameter steel bushing from Redding's 73 series, the little part that makes a bushing-style sizing die worth owning. Instead of squeezing your case necks down too far and expanding them back out like a standard die does, a bushing sizes the neck to one specific diameter so you control exactly how much neck tension you're putting on the bullet. Pick the right size and your brass lasts longer, your runout drops, and your velocity spreads tend to tighten up.
These are machined from heat-treated steel with the sizing diameter hand-polished to a surface hardness of Rc 60-62. That hard, slick finish is what keeps the sizing effort low and the bushing wearing evenly over thousands of cases. Redding offers the full lineup in .001 inch increments from roughly .185 up through .368, so there's a size for nearly any centerfire neck you'd want to load, and this one covers .286.
How the .286 Redding Bushing Fits Your Setup
The .286 bushing drops into any Redding bushing-style die, including the Type S full-length and neck sizing dies as well as the Competition seating setups. It also interchanges with L.E. Wilson style bushings, so if you've already got a mixed drawer of bushings they'll play nice together. Just drop it in numbers-down, bring your decapping rod into contact, and you're ready to size.
Picking the Right Size Bushing
Measuring is the whole game here. Seat a bullet in a loaded round, measure the outside neck diameter with a good micrometer, then subtract for the neck tension you want. Redding's general guidance is to go about .001 under for turned necks and closer to .002 under if you're running factory-thickness, un-turned brass. The nice part about a bushing system is that if you decide you want a touch more or less grip on the bullet, you just swap to the next bushing instead of buying a whole new die.
Plenty of handloaders keep a few neighboring sizes on hand so they can fine-tune tension as their brass work-hardens or they switch brands, since different brass with different neck wall thickness often calls for a different bushing.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73286
- UPC: 611760732867
- Bushing Diameter: .286 in
- Style: 73 Series Steel Neck Sizing Bushing
- Material: Heat-treated steel
- Surface Hardness: Rc 60-62, hand-polished
- Compatibility: Redding bushing-style dies; interchanges with L.E. Wilson style bushings
- Available Range: .185 in to .368 in in .001 in increments
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One Redding .286 73 Style steel neck sizing bushing
Frequently Asked Questions
What dies does the Redding .286 steel bushing work with?
It fits all Redding bushing-style dies, including the Type S full-length and neck sizing dies and the Competition bushing dies. It also interchanges with L.E. Wilson style bushings. You just drop it into the die body numbers-down and bring the decapping rod into contact.
How do I know if .286 is the right bushing size for my brass?
Seat a bullet in a loaded round and measure the outside neck diameter with a precision micrometer, then subtract for the neck tension you want. Redding suggests roughly .001 under for neck-turned brass and about .002 under for un-turned factory-thickness brass. If .286 matches that math for your loaded rounds, it's your bushing.
What's the advantage of a bushing over a standard sizing die?
A standard die sizes every neck to one fixed dimension regardless of brass thickness, often overworking the neck and then expanding it back out. A bushing sizes the neck to one specific diameter so you control exactly how much tension grips the bullet. That means less stress on your brass, better consistency, and the freedom to fine-tune by simply swapping bushings.
Is the Redding .286 bushing made of steel or titanium nitride?
This one is Redding's heat-treated steel version, with the sizing diameter hand-polished to Rc 60-62 hardness for smooth, low-effort sizing. Redding also offers the same diameters in a titanium nitride coating if you prefer that finish, but this listing is the steel bushing.




Reviews
There are no reviews yet.