0
0

Redding 73 Style Steel Neck Sizing Bushing .273 – MPN 73273

UPC: 611760732737

$20.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot a bushing-style neck sizing die from Redding, this .273 steel bushing lets you fine-tune neck tension down to the thousandth. Rather than oversizing your case necks and working the brass harder than it needs to be, you pick the bushing diameter that holds the bullet just right. That means more consistent seating force, longer case life, and the kind of repeatability that shows up on paper at distance.

What the .273 Redding Bushing Does

This bushing measures .273 inches on the inside, which is the dimension that actually sizes your case neck. The general rule handloaders follow is to measure the outside diameter of a loaded round's neck and subtract a couple thousandths for the neck tension you want. Redding offers these in .001 inch increments from .185 inches through .368 inches, so if the .273 ends up being a hair off for your brass and bullet combination, there's a neighbor size to fine-tune with.

How the 73 Style Steel Bushing Is Built

These are machined from heat-treated steel, and the sizing surfaces are hand-polished to a hardness of Rc 60-62. That hardness and polish is what keeps the sizing effort down and keeps the bushing holding its dimension over a long reloading life. Redding makes these in the USA, and every bushing shares the same external footprint, a half-inch outside diameter by three-eighths of an inch long, so it interchanges freely across all Redding bushing-style neck sizing dies.

Fitting the Bushing Into Your Setup

Keep in mind this is the bushing only. The sizing die itself and your shellholder are separate pieces, so you'll want to already have a Redding bushing-style die on the bench. The last three digits of the part number spell out the size, which makes it easy to keep a drawer of different diameters organized once you start chasing the perfect tension for each of your rifles.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73273
  • UPC: 611760732737
  • Bushing Style: 73 Style Steel
  • Inside/Sizing Diameter: .273 in
  • Material: Heat-treated steel
  • Surface Hardness: Rc 60-62
  • Finish: Hand-polished sizing diameters
  • External Dimensions: 1/2 in O.D. x 3/8 in long
  • Available Size Range: .185 in to .368 in (.001 in increments)
  • Compatibility: All Redding bushing-style neck sizing dies
  • Country of Origin: USA

What’s Included

  • One Redding .273 73 Style Steel Neck Sizing Bushing

Frequently Asked Questions

Will the .273 73 Style bushing fit my Redding die?

Yes. Every Redding steel neck bushing shares the same outside dimensions, a half-inch O.D. by three-eighths of an inch long, so this .273 bushing interchanges freely in all Redding bushing-style neck sizing dies. You just need to already own a compatible bushing-style die, since the die is sold separately.

How do I know if .273 is the right bushing size for my loads?

Measure the outside diameter of a loaded cartridge neck with a caliber-appropriate micrometer or caliper, then subtract the amount of neck tension you want, typically one to three thousandths. If that number lands at .273, this is your bushing. Many handloaders keep a couple of adjacent sizes on hand to fine-tune for different brass and bullet combinations.

Does this come with the neck sizing die or a shellholder?

No, this is the bushing by itself. The bushing-style sizing die and the shellholder are separate purchases, so make sure you have a Redding bushing-style die before ordering just the bushing.

What's the difference between the steel 73 Style bushing and the titanium nitride version?

Both share the same external dimensions and interchange in the same dies. The steel bushing is heat-treated and hand-polished to Rc 60-62 hardness, while the titanium nitride version adds a surface coating that further increases hardness and cuts sizing friction. For most handloaders, these steel bushings do the job very well.

Additional information

UPC

611760732737

Manufacturer

Manufacturer Part Number

73273

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .273 – MPN 73273”