0
0

Redding 73 Style Heat-Treated Steel Neck Bushing .269 – 73269

UPC: 611760732690

$20.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck tension is one of those little details that separates good handloads from great ones, and the Redding 73 Style Steel Bushing in .269 gives you precise control over it. Instead of overworking your brass with a standard neck sizer, you pick the exact bushing diameter that matches your loaded cartridge, size just the amount you want, and let the rest of the neck alone. The result is more uniform tension round to round, longer brass life, and the kind of consistency that shows up on paper.

This one is machined from heat-treated steel with the sizing diameter hand-polished to a surface hardness of Rc 60-62, which keeps sizing effort low and the finish slick. Every bushing is clearly marked with its size, so there's no guesswork when you're swapping between loads at the bench. It's made in the USA and built to the tight tolerances Redding is known for among precision reloaders.

How the .269 Redding Neck Bushing Fits Your Setup

Redding neck sizer bushings freely interchange across all Redding bushing-style sizing dies, including the Type S family, and they also play nice with other common bushing dies like Wilson, Hornady, and Short Action Customs. Bushings come in .001 inch increments covering calibers from 17 through 338, so you can fine-tune tension as your brass and components change over time.

Picking the Right Redding 73 Style Bushing Size

Figuring out your size is straightforward. Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002 inch to account for brass spring-back and the tension you want on the bullet. Many reloaders measure several loaded rounds and work off the average for the best starting point. If you're running moly-coated bullets, you may want to step down a thousandth or two for a tighter hold. Keeping a few sizes on either side of your main bushing is a smart move when you're load developing.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73269
  • UPC: 611760732690
  • Bushing Diameter: .269 inch
  • Type: 73 Style Heat-Treated Steel Neck Sizing Bushing
  • Material: Heat-treated steel, hand-polished
  • Surface Hardness: Rc 60-62
  • Caliber Range Covered: 17 through 338
  • Size Increments: .001 inch
  • Compatibility: Redding bushing-style sizing dies, including Type S
  • Country of Origin: USA
  • Quantity: 1 bushing

What’s Included

  • One Redding 73 Style heat-treated steel neck sizing bushing, .269 diameter

Frequently Asked Questions

What dies does the Redding .269 steel bushing work with?

It freely interchanges across all Redding bushing-style neck sizing dies, including the Type S line. These bushings are also compatible with other common bushing dies such as Wilson, Hornady, and Short Action Customs, since the dimensions are shared across those systems.

How do I know if .269 is the right bushing size for my loads?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002 inch to allow for brass spring-back and the neck tension you want. Measuring several loaded rounds and using the average gives you the most reliable starting point. If .269 lands in that window for your brass and bullet combo, it's the one you want.

What's the difference between the steel 73 style bushing and the titanium nitride version?

The steel bushing is heat-treated and hand-polished to a Rc 60-62 surface hardness for smooth sizing. The titanium nitride version adds a TiN coating on top of that to further harden the surface and cut sizing friction. Both size identically; the TiN just offers a bit more slickness and wear resistance.

Will using a Redding neck bushing help my brass last longer?

Yes. Because you only size the neck down the amount you choose rather than overworking it like a standard one-size die, the brass sees less stress each cycle. That reduced working typically extends case life and helps keep neck tension consistent from load to load.

Additional information

UPC

611760732690

Manufacturer

Manufacturer Part Number

73269

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Heat-Treated Steel Neck Bushing .269 – 73269”