0
0

Redding 73 Style Steel Neck Sizing Bushing .264 (73264)

UPC: 611760732645

$20.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck tension is one of those details that separates good handloads from great ones, and this is where the Redding 73 Style Steel Bushing in .264 earns its keep. Rather than oversizing your case necks and working the brass harder than it needs to be, you pick the exact bushing diameter that gives you just the right grip on the bullet. This one measures .264 and carries Redding's part number 73264.

How the Redding .264 Steel Bushing Works

These bushings let you control neck size and tension precisely instead of leaving it to a one-size-fits-all die. The common method is simple: measure the outside neck diameter of a loaded round with a quality micrometer, then subtract .001 to .002 to account for brass spring-back and bullet grip. That final number is the bushing you want. Because the bushing floats and self-centers on the case neck inside the die, you also get a boost in concentricity, which is exactly what you're chasing when you reach for a bushing setup in the first place.

Build and Fitment of the 73 Style Bushing

This is heat-treated steel hardened to roughly Rc 60-62, with the sizing diameter hand-polished to cut down on sizing effort and keep things smooth. Each bushing is clearly marked with its size, so there's no guessing once you've got a few in the drawer. The external dimensions run 1/2 inch outside diameter by 3/8 inch long, which is the standard footprint that drops into any Redding bushing-style sizing die and interchanges with Wilson-style bushings too. It's made in the USA, which is what folks have come to expect from Redding reloading gear.

Picking the Right Redding Bushing

Since bushings come in .001 increments across the whole caliber range, serious reloaders usually keep a small spread on hand to fine-tune tension as their brass and loads change. A .264 bushing is a common choice for 6.5mm handloaders working with various neck wall thicknesses. If you're building accurate loads and want to stop overworking your brass, matching the bushing to your actual measured necks is the move.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 73264
  • UPC: 611760732645
  • Bushing Diameter: .264 in
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62
  • Finish: Hand-Polished Sizing Diameter
  • External Dimensions: 1/2 in O.D. x 3/8 in long
  • Compatibility: All Redding bushing-style dies; interchanges with Wilson-style bushings
  • Country of Origin: Made in USA
  • Quantity: 1 bushing

What’s Included

  • One (1) Redding 73 Style Heat-Treated Steel Neck Sizing Bushing, .264 diameter

Frequently Asked Questions

How do I know if the .264 Redding bushing is the right size for my loads?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002 inch. That accounts for brass spring-back and the grip needed to hold the bullet. If that math lands around .264, this is your bushing, though it's smart to confirm against your own brass since neck wall thickness varies.

Will this bushing fit my Redding die?

Yes. The .264 steel bushing uses the standard 1/2 inch O.D. by 3/8 inch long footprint, so it drops into any Redding bushing-style neck sizing or Type S full-length sizing die. It also interchanges with Wilson-style bushings if you run those.

What's the difference between the steel bushing and the Titanium Nitride version?

Both are heat-treated steel with the same external dimensions and interchange in the same dies. The steel bushing is hand-polished to Rc 60-62 to reduce sizing effort. The Titanium Nitride version adds a surface treatment that further increases hardness and reduces sizing friction, which some reloaders prefer to minimize stress on brass.

Do I still need the expander when using this bushing?

Generally no. One of the main reasons reloaders switch to a bushing setup is to size the neck down to a precise diameter in a single step without an expander ball working the brass a second time. Many handloaders remove the decapping rod and expander from their Type S die when running bushings, which helps keep the brass from being overworked.

Additional information

UPC

611760732645

Manufacturer

Manufacturer Part Number

73264

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .264 (73264)”