Description
This is Redding's .263 diameter neck sizing bushing, part number 73263, machined from heat-treated steel for reloaders who want real control over neck tension. Instead of over-working your case necks the way a conventional one-size die can, a bushing like this lets you size down to just the right amount, hold the bullet securely, and keep your brass alive for more firings. The sizing surface is hand-polished to a surface hardness of Rc 60-62, which keeps sizing effort low and the pull on your necks consistent from case to case.
What the .263 Redding Bushing Does for Your Loads
Neck tension is one of those details that separates plinking ammo from loads that print tight and repeatable. By picking the correct bushing diameter, you give the bullet exactly the grip it needs without crushing the neck and springing it back. Less working of the brass means less annealing, fewer split necks down the road, and a more uniform release every time you break a shot.
Fitting the 73 Style Steel Bushing to Your Press
This bushing shares the standard Redding external dimensions of 1/2 inch outside diameter by 3/8 inch long, so it freely interchanges across all Redding bushing-style neck sizing dies, including the Type S and Competition sizer dies. The bushings are self-centering and swap out in seconds, so you can keep a small range on the bench and tune tension on the fly. Each one is clearly marked with its size so there's no guessing which is which in the box.
Picking the Right Bushing Size
To land on the correct diameter, measure the outside neck diameter of a loaded round with a good micrometer, then subtract about .001 to .002 inch to account for brass spring-back and the tension you want on the bullet. If you're running moly-coated bullets, you may want to step down an extra thousandth or two. The .263 covers common needs in several calibers, and since Redding offers the full range in .001 inch steps, it's easy to fine-tune once you've chronographed and chased your best node.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number (MPN): 73263
- UPC: 611760732638
- Bushing Diameter: .263 inch
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62, hand-polished
- External Dimensions: 1/2 inch OD x 3/8 inch long
- Compatibility: All Redding bushing-style neck sizing dies, including Type S and Competition
- Style: 73 Series Steel
- Application: Rifle neck sizing
- Country of Origin: Made in USA
What’s Included
- One Redding .263 heat-treated steel neck sizing bushing (73263)
Frequently Asked Questions
Which dies does the Redding .263 steel bushing fit?
It freely interchanges in all Redding bushing-style neck sizing dies, including the Type S and Competition sizer dies. Because it uses the standard 1/2 inch OD by 3/8 inch length, it drops in and self-centers without any fitting. The bushing and the die are sold separately, so you'll need a bushing-style die to use it.
How do I know if .263 is the right bushing size for my loads?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract roughly .001 to .002 inch to account for brass spring-back and bullet tension. That number is your starting bushing size. If you're loading moly-coated bullets, you may want to go a thousandth or two smaller.
What's the difference between the steel and titanium nitride versions?
This is the heat-treated steel bushing, hand-polished to a surface hardness of Rc 60-62 to keep sizing effort low. The titanium nitride versions share the same features but add a TiN coating that bumps surface hardness even higher and further reduces sizing friction. Both interchange in the same dies, so it comes down to preference and how much neck lube you like to run.
Does using a bushing really help brass last longer?
Yes. A standard die typically sizes the neck down more than needed and relies on an expander ball to open it back up, which overworks the brass. A correctly sized bushing only moves the neck as much as necessary for proper tension, so you get less work-hardening, fewer split necks, and more reloads per case.


Reviews
There are no reviews yet.