Description
This is Redding's .259" diameter 73 Style steel neck sizing bushing, part number 73259. It's a small piece of hardware that does a big job, letting you control the precise amount of neck tension on your loaded rounds instead of settling for whatever a standard full-length die gives you. For handloaders chasing tighter groups, this is the kind of detail that separates good ammo from great ammo.
Why the .259 Redding Steel Bushing Matters
The sizing diameter is hand polished with a surface hardness of Rc 60-62, which cuts down the effort it takes to run brass through and keeps friction low. Because you're only sizing the neck down the exact amount needed, there's less working of the brass, which helps prolong case life while keeping things consistent round to round. That self-centering design means the bushing floats to find the neck, so you get even tension all the way around.
Fitment and Sizing of the 73 Style Bushing
All Redding steel bushings share the same external dimensions, 1/2" outside diameter by 3/8" long, so they freely interchange in Redding bushing-style neck sizing dies including the Type S and Competition dies. Bushings run in .001" increments across the full .185" to .368" range, and the last three digits of the part number tell you the size, so 73259 is your .259" bushing. To pick the right one, measure the outside diameter of a loaded case neck with a bullet seated and subtract about .001" to account for brass springback and proper grip.
Built in the USA
Redding has a long reputation among precision reloaders, and these bushings are made in the USA to the same standard. Swap bushings as your brass and load develop and you'll have a repeatable way to tune neck tension without buying a whole new die.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number (MPN): 73259
- UPC: 611760732591
- Style: 73 Style Steel Neck Sizing Bushing
- Sizing Diameter: .259"
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62, hand polished
- External Dimensions: 1/2" OD x 3/8" long
- Size Increments: .001"
- Available Size Range: .185" to .368"
- Compatibility: Redding bushing-style neck sizing dies (Type S, Competition)
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One Redding 73 Style .259" steel neck sizing bushing
Frequently Asked Questions
What size is the Redding 73259 bushing?
This is a .259" diameter bushing. Redding uses the last three digits of the part number to indicate size, so 73259 equals .259". It sizes the case neck to that inside dimension when seated in a compatible die.
Which dies does this 73 Style steel bushing fit?
It fits all Redding bushing-style neck sizing dies, including the Type S and Competition die lines. Every Redding steel bushing shares the same 1/2" OD by 3/8" long body, so they interchange freely. You can swap sizes in and out of the same die without any tools.
How do I know which bushing diameter I need?
Measure the outside diameter of a loaded case neck with the bullet seated, then subtract about .001". That accounts for brass springback and leaves enough grip to hold the bullet securely. If your measurement lands at .260", the .259" bushing is a common choice.
What's the difference between the steel and titanium nitride bushings?
Both share the same dimensions and interchange in the same dies. The steel bushing is heat treated and hand polished to Rc 60-62 hardness. The titanium nitride version adds a surface coating that boosts hardness further and reduces sizing friction, but the plain steel bushing works great for most handloaders.





Reviews
There are no reviews yet.