0
0

Redding 73 Style Steel Neck Sizing Bushing .227 Diameter

UPC: 611760732270

$20.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .227 diameter steel neck sizing bushing from Redding's 73 series (part number 73227), the little piece that lets you take real control over neck tension when you're building precision loads. Instead of sizing the neck way down and springing it back open with an expander, a bushing sizes the neck to the exact diameter you choose, which means less brass working, better concentricity, and more consistent bullet hold round after round.

It's machined from heat-treated steel with the sizing bore hand-polished to a surface hardness of Rc 60-62. That hard, slick finish is what keeps sizing effort low and helps the bushing hold its dimension over a long reloading career. Each one measures a standard 1/2 inch outside diameter by 3/8 inch long and is clearly marked with its size, so there's no guesswork when you've got a drawer full of them. Being made in the USA doesn't hurt either.

Where the Redding .227 Bushing Fits

These bushings freely interchange across all of Redding's bushing-style neck sizing dies, including the Type S and Competition sizers. The whole 73 series runs from .185 inch through .368 inch in .001 inch steps, covering calibers from .17 all the way up to .338. This particular .227 sits right in 22-caliber territory, so it's a common pick for folks loading rounds like the .223, .22-250, and similar necks.

Picking the Right Redding Steel Bushing Size

Getting the size right is simple. Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 inch to allow for brass springback and proper bullet grip. If you're running moly-coated bullets, you may want to step down another thousandth for a slightly tighter neck. Having a couple of sizes on hand lets you fine-tune tension until your groups tell you you've found the sweet spot.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73227
  • UPC: 611760732270
  • Bushing Diameter: .227 inch
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62, hand-polished
  • Outside Dimensions: 1/2 inch O.D. x 3/8 inch long
  • Series: 73 Style Steel
  • Compatibility: All Redding bushing-style neck sizing dies
  • Available Range: .185 inch thru .368 inch in .001 inch increments
  • Country of Origin: USA

What’s Included

  • One Redding 73 Style .227 diameter steel neck sizing bushing

Frequently Asked Questions

What dies does the Redding .227 steel bushing work with?

It drops into any Redding bushing-style neck sizing die, including the Type S and Competition sizer dies. All bushings in the 73 series share the same 1/2 inch O.D. by 3/8 inch length, so they interchange freely. The die itself is sold separately.

How do I know if .227 is the right bushing size for my brass?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract roughly .001 inch to account for brass springback and bullet grip. If the result lands at .227, this is your bushing. Many reloaders keep a couple of neighboring sizes on hand to fine-tune neck tension for their specific brass and bullets.

What's the difference between the steel bushing and the titanium nitride version?

Both are heat-treated steel with the same dimensions and hand-polished bore. The titanium nitride bushings add a surface coating that further increases hardness and reduces sizing friction, which some folks prefer when running coated bullets or sizing a lot of brass. The steel version performs the same core job and is the more economical choice.

Does using a bushing really improve accuracy?

Bushing sizing lets you set the exact amount of neck tension rather than over-working the brass and springing it back with an expander. That tends to improve neck concentricity, extend case life, and give more consistent bullet release. Many precision handloaders consider it one of the simpler upgrades for tightening up groups.

Additional information

UPC

611760732270

Manufacturer

Manufacturer Part Number

73227

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .227 Diameter”