0
0

Redding Type S Bushing Neck Die 300 Win Mag 71153

UPC: 611760711534

$75.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been chasing tighter groups out of your 300 Win Mag, the Redding Type S Bushing Neck Die is where a lot of precision handloaders start. Instead of relying on a fixed internal diameter like a standard neck die, this one uses interchangeable sizing bushings so you decide exactly how much the neck gets squeezed down. That means you control neck tension to the thousandth, matched to your specific brass and bullet combination rather than whatever a one-size die hands you.

How the Type S 300 Win Mag Die Earns Its Keep

Bushings drop in and swap out in .001-inch increments, and because the bushing is free to float and self-center on the case neck, you end up with better concentricity and less runout. The adjustable decapping rod lets you position the bushing to size only part of the neck length if you want to leave a portion unsized for alignment in the chamber. Pull the bushing entirely and the die doubles as a decapping die, which is handy if you like to knock out primers before tumbling. Worth knowing up front: bushings are sold separately, so you'll want to grab the size that fits your brass.

Picking the Right Bushing for Your 300 Win Mag

The simplest method is to measure the outside neck diameter of a loaded round with a precision micrometer, then subtract about .002 inches to account for brass spring-back and give you proper bullet grip. Neck wall thickness varies between brass brands, so if you run both Lapua and Hornady, for example, you may want a couple different bushings on hand. This die comes with a standard size button on the decapping rod, which is great for folks loading commercial brass as-is, plus a decapping pin retainer so you can neck size without the button if you sort or turn your necks for uniformity.

Redding builds these in Cortland, New York, and the whole Type S line traces its roots to benchrest and 1000-yard competition. For a magnum round like the 300 Win Mag where consistent neck tension pays off downrange, this die is a solid step up from a basic sizing setup.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 71153
  • UPC: 611760711534
  • Cartridge: .300 Winchester Magnum
  • Die Type: Type S Bushing Neck Sizing Die
  • Bullet Diameter: 0.308
  • Thread: 7/8"-14
  • Shellholder: #6
  • Bushing Increments: .001 inch
  • Bushings Included: No (sold separately)
  • Country of Origin: United States

What’s Included

  • Redding Type S bushing neck sizing die (300 Win Mag)
  • Adjustable decapping rod with standard size button
  • Decapping pin retainer
  • Instruction sheet

Frequently Asked Questions

Does the Type S bushing neck die for 300 Win Mag come with bushings?

No, bushings are sold separately. This lets you pick the exact size that matches your brass and the neck tension you're after. Redding offers bushings in .001-inch increments in both heat-treated steel and Titanium Nitride coated versions.

How do I figure out which bushing size I need?

Measure the outside neck diameter of a loaded round with a precision micrometer, then subtract about .002 inches to allow for brass spring-back and proper bullet grip. Because neck wall thickness differs between brass brands, it's smart to keep a couple of bushing sizes on hand if you load more than one brand. Many handloaders also pick up a bushing one size above and below their target to experiment with neck tension during load development.

Can this die be used to just decap brass?

Yes. Remove the bushing and the Type S neck die works as a decapping die, which is useful if you prefer to knock out primers before cleaning your cases. The decapping pin retainer also lets you neck size without the size button if you sort or turn your necks for uniformity.

What makes a bushing die better than a standard neck sizing die?

A standard die sizes to one fixed dimension and then pulls the neck back over an expander, which can overwork the brass. A bushing die sizes the outside of the neck to precisely where you want it and the floating bushing self-centers on the case, improving concentricity and reducing runout. That translates to more consistent neck tension and generally straighter ammo.

Additional information

UPC

611760711534

Manufacturer

Manufacturer Part Number

71153

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Neck Die 300 Win Mag 71153”