0
0

Redding Type S Bushing Neck Sizing Die 6.5×55 Swedish 71132

UPC: 611760711329

$75.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been chasing tighter groups out of your 6.5×55 Swedish, neck tension is one of the biggest levers you can pull, and the Redding Type S Bushing Neck Die hands you full control over it. Instead of sizing the neck a fixed amount, this die uses interchangeable bushings so you decide exactly how much you squeeze the brass back down. It's a favorite setup among benchrest and long range handloaders for good reason, and it brings that same precision to the classic Swede.

The bushing drops in and floats in the die, letting it self-center on the case neck. That self-centering action is what keeps concentricity tight and runout low, which translates to bullets that start out straighter in the case and chamber more uniformly. Because the bushings come in .001-inch increments, you can measure the outside diameter of a loaded round, subtract a couple thousandths for spring-back, and land on the tension that works best for your particular brass and bullet combo.

Why 6.5×55 Reloaders Reach for the Type S Bushing Neck Die

The 6.5×55 Swedish is a long-lived, mild-recoiling cartridge that rewards careful handloading, and brass life matters with it. Neck sizing only works the brass less than full-length sizing, so cases tend to last longer and chamber snugly in the rifle they were fired in. The adjustable decapping rod also lets you size just a portion of the neck if you want, giving you another way to fine-tune fit and feel.

Setting Up and Running the Type S Neck Die

The die threads into any standard 7/8"-14 reloading press, so it drops right into whatever single-stage setup you're running. It ships with a decapping rod fitted with a standard size button, which is handy if you're loading once-fired or commercial brass straight out of the box. A decapping pin retainer is included as well, so folks who turn or sort their necks can run the die without the size button for the most uniform results. Just remember the sizing bushings are sold separately, which lets you buy only the exact size your load calls for.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 71132
  • UPC: 611760711329
  • Cartridge: 6.5×55 Swedish (6.5×55 SE / Swedish Mauser)
  • Die Type: Type S Bushing Neck Sizing Die
  • Bullet Diameter: 0.264 in
  • Bushing Increments: .001 inch
  • Bushings Included: No, sold separately
  • Decapping Rod: Adjustable, with standard size button
  • Decapping Pin Retainer: Included
  • Thread: Standard 7/8"-14
  • Material: Steel
  • Shellholder: #7
  • Quantity: Single die
  • Country of Origin: USA

What’s Included

  • Type S Bushing Neck Sizing Die body
  • Adjustable decapping rod with standard size button
  • Decapping pin retainer
  • Instruction sheet

Frequently Asked Questions

Do bushings come with the Type S Bushing Neck Die?

No, the sizing bushings are sold separately. This lets you pick the exact bushing diameter that matches your brass and desired neck tension rather than paying for sizes you won't use. Redding offers bushings in both heat-treated steel and titanium nitride in .001-inch increments.

How do I figure out which bushing size I need?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .002 inch. That accounts for brass spring-back and gives you proper neck tension for holding the bullet. Since neck wall thickness varies by brass brand, it's worth measuring your actual loaded rounds rather than guessing.

Will this die work in my press?

Yes, it uses standard 7/8"-14 threads, so it fits any common single-stage reloading press. You'll also want a #7 shellholder for 6.5×55 Swedish. The die itself threads in like any other sizing die.

What's the advantage of neck sizing over full-length sizing for 6.5×55?

Neck sizing only works the case neck rather than the whole body, so your brass sees less stress and tends to last longer. Cases also stay fit to the chamber they were fired in, which can help with consistency. If a case gets tight to chamber after repeated firings, a body die can be added to bump the shoulder when needed.

Additional information

UPC

611760711329

Manufacturer

Manufacturer Part Number

71132

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Neck Sizing Die 6.5×55 Swedish 71132”