0
0

Redding Type S Elite Bushing 3-Die Set 25-06 Remington

UPC: 611760601200

$276.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 25-06 Remington and chasing tighter groups, the Redding Type S Elite set is about as complete as a bushing die package gets. Part number 60120, this three-die set bundles a Type S Bushing Full Length Sizing Die, a Type S Bushing Neck Sizing Die, and Redding's Competition Seating Die into one box. That combination lets you neck size only, full length resize, or bump the shoulder when you need to, all with the same dies on your bench.

What Makes the Type S Elite Set Different

The heart of the system is the interchangeable bushing design. Both sizing dies accept neck bushings available in .001 inch increments, so you dial in exactly the neck tension your brass and bullets like instead of over-working the case neck every cycle. The bushings float to self-center on the neck, which does good things for concentricity and runout. Pull the bushing and the full length die can run as a body die, while the neck die becomes a simple decapping die, so you get real flexibility out of three tools.

Seating Depth You Can Trust in Your 25-06

The Competition Seating Die is the piece most reloaders fall in love with. It uses a sliding sleeve that captures and aligns the case and bullet before the seating stem ever touches the bullet, which is why it earned its reputation for producing remarkably straight ammo. The micrometer top adjusts seating depth in clean, repeatable clicks, so going back to a proven load is quick and painless. It ships with a standard seating stem that handles most bullet shapes, and a VLD stem is available separately if you run long, sleek projectiles.

A Few Things Worth Knowing

Keep in mind the neck bushings and the #1 shellholder are sold separately, which is normal for bushing-style sets since everyone's brass and neck-turning preferences differ. The decapping rod comes with a standard size button plus a retainer, so folks running neck-turned brass can skip the button entirely. Everything is machined and finished in the USA, which is a big part of why Redding dies have the following they do among precision loaders.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 60120
  • UPC: 611760601200
  • Cartridge: 25-06 Remington
  • Set Type: Type S Elite Bushing 3-Die Set
  • Number of Dies: 3
  • Dies Included: Type S Bushing Full Length Sizing, Type S Bushing Neck Sizing, Competition Seating
  • Bushing Adjustment: .001 inch increments
  • Bullet Diameter: 0.257 inch
  • Shellholder: #1 (sold separately)
  • Die Thread: 7/8-14
  • Seating Stem: Standard (VLD stem available separately)
  • Country of Origin: USA

What’s Included

  • Type S Bushing Full Length Sizing Die
  • Type S Bushing Neck Sizing Die
  • Competition Bullet Seating Die with micrometer and standard seating stem
  • Decapping rod assembly with standard size button and decapping pin retainer
  • Spare decapping pin
  • Hex/Allen wrench
  • Die box
  • Instructions

Frequently Asked Questions

Are neck sizing bushings included with the 25-06 Remington Type S Elite set?

No, the bushings are sold separately so you can match neck tension to your exact brass and bullet combo. Redding offers them in .001 inch increments and in both hardened steel and titanium nitride coated versions. You'll want to measure a loaded round's neck and subtract a few thousandths to figure out your starting bushing size.

Does this set come with a shellholder?

It does not. The 25-06 Remington uses a #1 shellholder, which you'll need to pick up separately if you don't already have one on your bench. Most 25-06 presses are run with that same #1 holder across a bunch of common cartridges, so there's a good chance you already own it.

Can I neck size only with this die set, or do I have to full length resize?

You can do either. The set includes both a Type S Bushing Neck Sizing Die for neck-only work and a Type S Bushing Full Length Sizing Die for full resizing and shoulder bumping. That flexibility is the whole point of the Elite set, letting you tailor your process to your rifle and brass.

What makes the Competition Seating Die worth it for 25-06 handloading?

The Competition Seating Die uses a sliding sleeve that aligns the case and bullet before seating, which produces very straight, low-runout ammo. The micrometer head lets you set and return to a seating depth with repeatable precision. It ships with a standard seating stem, and a VLD stem is available separately for longer, sleeker bullets.

Additional information

UPC

611760601200

Manufacturer

Manufacturer Part Number

60120

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Elite Bushing 3-Die Set 25-06 Remington”