0
0

Redding 7mm Rem SAUM Competition Bushing Neck Die Set 58280

UPC: 611760582806

$332.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Redding built this set for handloaders who care about every thousandth of an inch. The 7mm Remington SAUM Competition Bushing Neck Die Set is a three-die package designed to let you size the neck, bump the shoulder, and seat bullets with the kind of repeatable accuracy that benchrest and long range folks chase. It covers the full process in deliberate steps so you're working the brass as little as possible, which is exactly what keeps cases alive and runout low.

What Comes in the 7mm SAUM Competition Bushing Neck Set

You get three dies: the Competition Bushing Neck Sizing Die, a Body Die, and the Competition Seating Die. The neck sizing die uses an internal sliding sleeve that supports and aligns the case with the bushing before any sizing starts, and the bushing floats to self center on the neck. That setup produces straighter necks and more consistent tension than a standard die with an expander ball. The Body Die handles full length body sizing and sets the shoulder back when cases start getting sticky to chamber, without ever touching the neck.

Dialing In the Redding Competition Bushing Neck Die

Interchangeable bushings are what make this system shine. They're available in .001 inch steps, so you pick exactly how much neck tension you want. A common starting point is to measure the neck of a loaded round and go one to three thousandths under that number. The micrometer on the neck die also lets you control how much of the neck length gets sized, and the Competition Seating Die carries a micrometer calibrated in .001 inch increments for dead repeatable seating depth. The seating stem is ground to match bullet profiles for straight line seating.

Two things worth knowing before you order: the bushings and a shell holder are sold separately, and the seating die ships with a standard stem that fits most bullets, with VLD stems offered as an add on. This set is a favorite among 7 SAUM wildcatters and precision loaders for good reason.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 58280
  • UPC: 611760582806
  • Cartridge: 7mm Remington SAUM (Short Action Ultra Magnum)
  • Set Type: 3-Die Competition Set
  • Dies Included: Competition Bushing Neck Sizing Die, Body Die, Competition Seating Die
  • Neck Sizing: Interchangeable bushings in .001 inch increments
  • Seating Adjustment: Micrometer, calibrated in .001 inch increments
  • Bushings: Sold separately
  • Shell Holder: Sold separately

What’s Included

  • Competition Bushing Neck Sizing Die
  • Body Die
  • Competition Seating Die (with standard seating stem)
  • Die box

Frequently Asked Questions

Do bushings come with the 7mm SAUM Competition Bushing Neck Die Set?

No, the bushings are sold separately so you can match the exact neck tension your brass and load call for. A good starting point is to measure the neck diameter of a loaded round and choose a bushing one to three thousandths smaller. Many loaders keep a couple of sizes on hand to fine tune.

What is the difference between the neck die and the body die in this set?

The Competition Bushing Neck Sizing Die sizes only the case neck using an interchangeable bushing, letting you reload necks after every firing with minimal stress. The Body Die full length resizes the case body and bumps the shoulder back without touching the neck, which you use once brass gets hard to chamber. Splitting the job into two steps keeps runout low and extends case life.

Does the Competition Seating Die work for all bullet types?

The seating die ships with a standard stem that fits most common bullet designs. If you're loading long VLD style bullets, Redding offers a VLD seating stem separately. Keep in mind this seating die isn't intended for heavily compressed loads.

Do I need a shell holder for this set?

Yes, a shell holder is required and it is not included with the set. You'll want the correct shell holder sized for the 7mm Remington SAUM case head. These are inexpensive and sold separately.

Additional information

UPC

611760582806

Manufacturer

Manufacturer Part Number

58280

Reviews

There are no reviews yet.

Be the first to review “Redding 7mm Rem SAUM Competition Bushing Neck Die Set 58280”