0
0

Redding 6.5×47 Lapua Competition Bushing Neck Die 56479

UPC: 611760564796

$149.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for 6.5×47 Lapua and precision is the whole point, this is the neck die you reach for. Redding built the Competition Bushing Neck Die around the same sliding sleeve concept found in their competition seating dies. Your case gets fully captured and aligned inside a tightly chambered sleeve before the sizing bushing ever makes contact, which means the bushing self-centers on the neck and keeps runout to a minimum. For benchrest and long-range work where every thousandth matters, that kind of repeatability pays off downrange.

How the 56479 Neck Die Controls Your Brass

This die runs on interchangeable sizing bushings sold in .001 inch increments, so you set neck tension exactly where your load wants it rather than being stuck with whatever a fixed die gives you. The bushing range for 6.5×47 Lapua runs from .281 up to .289, which covers turned and unturned brass. The micrometer adjustment on the bushing position lets you dial in how much of the neck length actually gets sized, and the adjustable decapping rod works alongside it to size only a portion of the neck if that's your preference.

Built for Prepped Brass and Serious Loaders

Redding designed this die for reloaders who take their case prep seriously. If you sort and turn your necks for uniform wall thickness, you can run the die without a sizing button and let the bushing do all the work, which many competition loaders prefer. The decapping rod stays in precise alignment by using the internal parts of the die as linear support, much like a firing pin rides in a bolt. Pair it with a quality bushing and you've got a tool that produces straight, consistent ammunition round after round.

Keep in mind this is a single neck sizing die. Bushings are sold separately, so you'll want to grab the right diameter for your brass and bullet combo before your first session at the bench.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 56479
  • UPC: 611760564796
  • Caliber: 6.5x47mm Lapua
  • Die Type: Competition Bushing Neck Sizing Die
  • Bushing Increments: .001 inch
  • Bushing Range: .281 to .289 inch
  • Bushings Included: No, sold separately
  • Adjustment: Micrometer bushing position
  • Decapping Rod: Adjustable, variable length
  • Application: Rifle reloading
  • Quantity: 1 die

What’s Included

  • One Redding 6.5×47 Lapua Competition Bushing Neck Sizing Die
  • Adjustable decapping rod with standard sizing button
  • Decapping pin retainer for sizing without the button
  • Die box
  • Instructions

Frequently Asked Questions

Do bushings come with the Competition Bushing Neck Die?

No, this die is supplied without bushings. Redding sells them separately in .001 inch increments so you can match the exact neck tension your load calls for. For 6.5×47 Lapua the usable range runs from .281 to .289, so measure your loaded necks and pick accordingly.

What makes this die different from a standard neck sizing die?

The big difference is the internal sliding sleeve that fully supports and aligns your case before the bushing touches the neck. That setup lets the bushing self-center on the case neck, which cuts down runout and produces straighter ammo. The micrometer and adjustable decapping rod also let you control exactly how much of the neck gets sized.

Can I use the 56479 die without a sizing button?

Yes. It ships with a decapping pin retainer so you can remove the sizing button and let the bushing handle all the neck work. This is the preferred setup for loaders who sort or neck turn their brass for uniform wall thickness and want the cleanest possible neck tension.

Is this the full three-die set or just the neck die?

This is the standalone Competition Bushing Neck Sizing Die (part number 56479). If you want the complete package with a body die and competition seating die added in, that's the separate three-die set. This listing covers the single neck die on its own.

Additional information

UPC

611760564796

Manufacturer

Manufacturer Part Number

56479

Reviews

There are no reviews yet.

Be the first to review “Redding 6.5×47 Lapua Competition Bushing Neck Die 56479”