Description
The Redding Competition Seating Die is built for handloaders who care about every thousandth. Designed specifically for the 6mm Creedmoor, this die uses a sliding sleeve that fully supports and aligns both the cartridge case and bullet before seating ever begins, which is where that reputation for low runout comes from. The seating stem floats so freely on its guide that Redding demonstrates it riding on a column of air, and it's precision ground to match the .243 bullet diameter exactly.
What Sets the 6mm Creedmoor Competition Seater Apart
The heart of this die is the micrometer adjustment on top. It's calibrated in .001" increments and adjusts without clicks, so you can dial in seating depth and repeat it load after load. The micrometer also has a reset feature, letting you return to a favorite depth after swapping to a different bullet or load and come right back without guesswork. For anyone chasing the lands or fine tuning a node, that repeatability is the whole point.
Matching the Seating Stem to Your Bullets
This die ships with Redding's standard profile seating stem, which handles most common 6mm bullet ogives well. If you're loading long, high-BC projectiles with secant ogives, Redding offers a VLD profile stem (part 55744 for the 6mm long) as a separate, direct-replacement upgrade. Matching the stem to your bullet keeps the contact point off the delicate ogive and tightens up seating depth consistency even further.
Fit and Feel at the Bench
Redding has been making reloading gear in Cortland, New York since 1946, and the Competition line is their top-shelf seater for a reason. The die runs on standard 7/8"-14 threading and works with the #1 shellholder for the 6mm Creedmoor. One thing worth knowing: this is a precision seater meant for standard loads, not heavily compressed charges. Pair it with a quality sizing die and you've got a setup that produces straight, consistent ammo worthy of a match rifle.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 55443
- UPC: 611760554438
- Cartridge: 6mm Creedmoor
- Die Type: Competition Micrometer Seating Die
- Bullet Diameter: 0.243"
- Micrometer Calibration: .001" increments, infinitely adjustable
- Seating Stem: Standard profile (VLD stem 55744 available separately)
- Thread: 7/8"-14
- Shellholder: #1
- Country of Origin: United States
What’s Included
- Redding 6mm Creedmoor Competition Seating Die
- Standard profile seating stem (installed)
- Lock ring
- Instructions
Frequently Asked Questions
Does the 6mm Creedmoor Competition Seating Die come with a micrometer top?
Yes. The micrometer adjustment is built into this die and is calibrated in .001" increments for precise seating depth. It adjusts smoothly without clicks and includes a reset feature so you can return to a favorite seating depth after changing loads.
Which seating stem comes in the die, and do I need the VLD stem?
The die ships with Redding's standard profile seating stem, which works well with most common 6mm bullet ogives. If you're loading long, high-BC bullets with secant ogives, the optional VLD profile stem (part 55744) is a direct replacement that improves stem-to-bullet contact. It's sold separately as an upgrade.
Why is this die known for low bullet runout?
Before seating starts, a close-fitting precision ground sleeve fully supports and aligns both the case and bullet. The free-floating seating stem is ground to match bullet diameter so closely it can ride on a column of air. That alignment is what keeps concentricity tight and runout low.
Can I use this die for compressed loads?
Redding notes this seater is not intended for compressed charges. For standard-density loads it produces excellent, repeatable seating depth. If you're running heavily compressed powder columns, a different seating setup would be the better call.



Reviews
There are no reviews yet.