0
0

Redding 45-70 Government Competition Bullet Seating Die 55209

UPC: 611760552090

$110.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're serious about squeezing every bit of accuracy out of your 45-70 Government loads, this is the seating die to reach for. Redding built its Competition Seating Die around a patented bullet alignment system that tackles the concentricity problems that plague ordinary seating dies. The case and bullet ride in a close-fitting, precision ground sleeve and get aligned well before seating ever begins, which keeps bullet run-out to a minimum and your groups tighter.

How the Redding Competition Seating Die Earns Its Keep

The heart of this die is a spring-loaded seating stem that floats so precisely it can be demonstrated to ride on a column of air. That stem is ground to match the bullet diameter, so it biases every bullet straight into the case neck. The result is the kind of repeatable, low run-out seating that benchrest and precision handloaders chase. The machining is clean and the sliding chamber is about as smooth as it gets in a seater.

Dialing In Your 45-70 Seating Depth

Up top you get a micrometer calibrated in .001" increments, infinitely adjustable without clicks so you can land exactly where you want. The zero-set feature lets you record and return to your rifle's favorite seating depth, which is a real time-saver when you're bouncing between loads or bullet styles. For a straight wall cartridge like the 45-70, that kind of fine control makes a noticeable difference on paper.

A couple of practical notes worth knowing: this die seats only, it does not crimp, so if your load calls for a crimp you'll want to add a separate crimp die. It also uses the standard 7/8"-14 thread and takes a #18 shellholder, which is sold separately. Redding recommends against using it with heavily compressed loads. Built in the USA from quality steel and shipped in a protective storage case, it's a tool that'll outlast most of the rifles you run it for.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 55209
  • UPC: 611760552090
  • Caliber: 45-70 Government
  • Die Type: Competition Bullet Seating Die
  • Thread: 7/8"-14
  • Adjustment: Micrometer, .001" increments, infinitely adjustable (no clicks)
  • Seating Stem: Spring-loaded, precision ground to bullet diameter
  • Shellholder: #18 (sold separately)
  • Bullet Diameter: 0.458"
  • Material: Steel
  • Crimp: No crimp function
  • Country of Origin: United States

What’s Included

  • Redding 45-70 Government Competition Bullet Seating Die
  • Plastic storage case

Frequently Asked Questions

Does the Redding 45-70 Government Competition Seating Die crimp the bullet?

No, this die seats only and does not apply a crimp. If your 45-70 load calls for a crimp, you'll need to pick up a separate crimp die to run alongside it. Redding offers a profile crimp die for the 45-70 if you want to stay in the same family.

Do I need a shellholder with this die?

Yes, and it's sold separately. The 45-70 Government uses a standard #18 shellholder. Make sure you have one on hand before your first reloading session.

What makes this Competition Seating Die more accurate than a standard seating die?

It uses a spring-loaded seating stem and a close-fitting precision ground sleeve that align the bullet and case before seating actually starts. That advance alignment minimizes bullet run-out, which translates to straighter ammo and tighter groups. The micrometer top also lets you set and repeat seating depth down to .001".

Will this die work with compressed 45-70 loads?

Redding advises against using it with compressed loads. The floating seating stem is designed for precise alignment rather than pushing against heavily packed powder charges. For standard and lighter-charge loads, it performs beautifully.

Additional information

UPC

611760552090

Manufacturer

Manufacturer Part Number

55209

Reviews

There are no reviews yet.

Be the first to review “Redding 45-70 Government Competition Bullet Seating Die 55209”

Related Products