Description
If you handload 7mm-08 for hunting or match work, this is the die that separates good ammo from ammo that shoots tiny groups. The Redding Competition Seating Die uses a sliding sleeve that fully supports and aligns both the case and the bullet before the seating stem ever touches the projectile. That alignment is where runout and concentricity problems usually creep in, and Redding's patented design was built specifically to beat them.
What Makes the 7mm-08 Competition Seating Die Different
Instead of a fixed seating plug, this die runs a free-floating seating stem that's precision ground to match the .284 bullet diameter. The fit is so tight the stem can be shown to float on a column of air, which keeps everything perfectly centered as the bullet drops into the case. The result is some of the straightest, most repeatable seating you can get from a single-stage press, and it's a big reason these dies have a following among benchrest and long-range crowds.
Dialing In Your Seating Depth
The micrometer head on top is calibrated in .001" increments and adjusts smoothly without clicks, so you can fine-tune bullet seating depth to the thousandth. It also has a re-set feature, meaning once you find the sweet spot for your pet load, you can note the setting and return to it later without guesswork. Anyone chasing the lands or load-developing with different bullets will appreciate how fast it is to go back to a known depth.
Good to Know Before You Load
This die ships with the standard profile seating stem, which handles most common 7mm bullets well. If you're loading long, sleek VLD or high-BC projectiles like Hornady ELD-M and ELD-X, Redding offers an accessory VLD stem sold separately that contacts those bullets lower on the ogive to prevent tip damage. One thing worth noting from Redding themselves: this is a precision instrument and isn't meant for heavily compressed loads, so treat it accordingly and it'll last a lifetime. It uses the industry-standard 7/8-14 thread and fits any standard reloading press.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 55139
- UPC: 611760551390
- Cartridge: 7mm-08 Remington
- Die Type: Competition Bullet Seating Die
- Case Type: Bottleneck
- Bullet Diameter: 0.284"
- Micrometer Adjustment: .001" increments, infinitely adjustable with re-set feature
- Seating Stem: Standard profile, free-floating
- Thread: 7/8-14
- Standard Shellholder: #1 (Redding 11001)
What’s Included
- Redding 7mm-08 Remington Competition Seating Die (standard profile seating stem installed)
- Micrometer seating depth adjustment head
- Die storage box
Frequently Asked Questions
Does the 7mm-08 Competition Seating Die come with a VLD stem?
No, it ships with the standard profile seating stem, which works great for most common 7mm bullets. If you're loading long, high-BC VLD-style bullets like Hornady ELD-M or ELD-X, Redding sells a separate VLD stem that engages those bullets lower on the ogive. That accessory helps prevent tip deformation on sleek, long-ogive projectiles.
Will this die work in any standard reloading press?
Yes. It uses the industry-standard 7/8-14 die thread, so it threads right into any standard single-stage or progressive press. You'll want a #1 shellholder to run 7mm-08 brass through it.
Is this a full die set or just the seating die?
This is the standalone Competition Seating Die only, so it handles bullet seating and seating depth. You'll still need a sizing die to resize and deprime your brass. Many reloaders pair it with a Redding full-length or bushing sizing die to build a complete 7mm-08 setup.
Can I use the Redding Competition Seating Die for compressed loads?
Redding specifically advises against it. The free-floating seating stem is a precision part with thinner walls than a standard seating plug, and the heavy pressure of a compressed load can crack it. For compressed powder charges, a standard seating die is the better tool.



Reviews
There are no reviews yet.