Description
If you've ever dragged a case neck across a standard steel expander, you know the drag, the squeak, and the lube you have to clean off afterward. Redding's 270 Caliber Carbide Sizing Button Kit solves that by swapping the steel button for one ground from carbide. The hard, slick surface glides through the neck so easily you can skip inside-neck lubrication altogether, which means less mess and less time at the cleaning bench.
What the 270 Carbide Size Button Actually Does
This is a .277 diameter button sized for the 270 family of cartridges. It rides free-floating on the decapping rod, so instead of being locked rigidly in place, it can self-center as it passes through the case neck. That floating design is the whole point: it pulls the neck straight rather than tugging it off to one side, which helps keep your necks concentric and your neck tension consistent from case to case. Carbide also wears far slower than steel, so this is a one-and-done upgrade that keeps working load after load.
Fitting the Carbide Sizing Button to Your Redding Dies
The kit is built to upgrade Redding Full Length, Neck, and Type-S sizing dies, and the carbide buttons are available across the bottleneck lineup from 20 cal on up. Installation is straightforward: you're replacing the existing button and retainer on the decap rod assembly, and Redding includes a fresh retainer plus a spare decapping pin in the package so you have the small parts you need on hand.
For anyone running semi-auto brass with dinged case mouths, the expander button earns its keep by ironing those necks back to spec. Bolt-gun handloaders chasing tight, repeatable neck tension will appreciate how uniform the finished IDs come out. It's a small part that makes a real difference in how your press feels and how your brass measures.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 49276
- UPC: 611760492761
- Caliber: .270 / 6.8mm (.277)
- Type: Carbide Size Button Kit
- Button Material: Carbide
- Design: Free-floating, self-centering
- Lubrication Required: No
- Die Compatibility: Redding Full Length, Neck, and Type-S sizing dies
- Caliber Range Available: Bottleneck cartridges .20 through .375
What’s Included
- Carbide size button (.277, 270 caliber)
- Retainer
- Spare decapping pin
Frequently Asked Questions
Do I still need case lube with the 270 carbide sizing button?
No, that's the main draw. The carbide surface is slick enough that inside-neck lubrication isn't needed, so expansion is smoother and there's nothing to clean off the inside of the neck afterward. You'll still want your usual case lube on the body for full-length sizing, but the neck itself runs dry.
Which Redding dies does this 270 carbide size button fit?
It's designed to upgrade Redding Full Length, Neck, and Type-S sizing dies in .270 caliber. You replace the existing button and retainer on the decap rod assembly with the carbide unit. It's a direct swap for Redding's own sizing dies in this caliber.
What does the free-floating design do for my brass?
The carbide button isn't locked rigidly to the decap rod, so it can self-center as it draws through the case neck. That helps keep the neck concentric and delivers more uniform inside diameters from case to case. The result is more consistent neck tension, which many handloaders chase for better accuracy.
Is this 270 carbide button useful for semi-auto brass?
Yes. Brass fired from semi-autos often picks up dings or flat spots at the case mouth, and running it over an expander button irons those necks back to a uniform, round dimension. If you load a lot of once-fired autoloader brass, this button earns its spot in the die.




Reviews
There are no reviews yet.