0
0

Redding Type S-Match Bushing Full Length Die Set 6.5×47 Lapua

UPC: 611760364792

$249.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Type S-Match Bushing Full Length Die Set in 6.5×47 Lapua is built for handloaders who want to fine-tune every part of their brass. This two-die set pairs a Type S Bushing Full-Length Sizing Die with Redding's Competition Bullet Seating Die, so you can size the case body, set your shoulder bump, and control neck tension all in one pass. The bushing system is what sets this apart from a standard full-length set. Instead of being locked into a fixed neck diameter, you pick the exact bushing you need in .001 inch increments and dial in the tension that shoots best in your rifle.

What the Type S-Match Bushing Full Die Does on the Bench

The full-length sizing die resizes the whole case while the interchangeable bushing handles the neck. Because the bushing self-centers on the neck, you get better concentricity than you'd see with a traditional expander ball setup. The adjustable decapping rod lets you move the bushing position so you can size only part of the neck length when you want to preserve a bit of fire-formed brass. Pull the bushing and internal parts out entirely and the sizer even doubles as a body die.

Why the 6.5×47 Lapua Competition Seater Earns Its Keep

The Competition Seating Die is the real workhorse for consistency. It uses a sliding sleeve that aligns the bullet and case before the bullet ever starts into the neck, which cuts down on runout. The micrometer head is calibrated in .001 inch increments and adjusts without clicks, so seating depth changes are fast and repeatable when you're chasing a node or tweaking loads for a new bullet.

This is a popular choice for 6.5×47 Lapua precision rifle builds, and reloaders consistently report tight groups and excellent fit and finish from the Redding line. Keep in mind the bushings and shellholder are purchased separately, so plan on picking up the right bushing for your brass and a #1 shellholder to get rolling. Made in the USA.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 36479
  • UPC: 611760364792
  • Caliber: 6.5x47mm Lapua
  • Die Set Type: Type S-Match Bushing Full Length (2-Die)
  • Bullet Diameter: 0.264 in
  • Bushing Increments: .001 inch
  • Bushing Range: 0.281 to 0.289 in
  • Shellholder: #1 (sold separately)
  • Lock Ring Thread: 7/8"-14
  • Material: Case-hardened steel
  • Seater Adjustment: Micrometer, .001 inch increments
  • Country of Origin: United States

What’s Included

  • One Type S Bushing Full-Length Sizing Die with decapping rod, sizing button, and decapping pin retainer
  • One Redding Competition Bullet Seating Die with standard seating stem and micrometer head
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does the 6.5×47 Lapua Type S-Match Bushing Full Die Set come with bushings?

No, bushings are sold separately. Redding ships these sets without bushings so you can choose the exact neck diameter that matches your brass and gives you the neck tension you want. For 6.5×47 Lapua, bushings generally run in the 0.281 to 0.289 inch range depending on your brass thickness and loaded neck diameter.

Is a shellholder included with this die set?

The shellholder is not included and is purchased separately. The 6.5×47 Lapua uses a #1 shellholder, so grab one if you don't already have it in your setup.

What's the difference between this and a standard full-length die set?

A standard full-length set sizes the neck down with a fixed expander ball. This Type S-Match set uses interchangeable bushings instead, letting you select your exact neck tension in .001 inch steps and improving concentricity since the bushing self-centers on the neck. You also get Redding's Competition Seating Die with its micrometer head rather than a standard seater.

Can the sizing die be used as a body die?

Yes. If you remove the bushing and the internal parts, the Type S full-length sizing die functions as a body die, sizing just the case body and bumping the shoulder without touching the neck. That flexibility is handy if you want to neck-size separately or preserve more of your fire-formed brass.

Additional information

UPC

611760364792

Manufacturer

Manufacturer Part Number

36479

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Full Length Die Set 6.5×47 Lapua”

Related Products