0
0

Redding Type S-Match Bushing Full Length Die Set 6.5 Creedmoor

UPC: 611760364464

$207.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 6.5 Creedmoor and chasing tighter groups, the Redding Type S-Match Bushing Full Length Die Set is where a lot of precision reloaders end up. This two-die set pairs a Type S Full Length Bushing Sizing Die with Redding's Competition Seating Die, giving you the kind of control over neck tension and bullet alignment that used to be reserved for benchrest folks running custom setups. It threads 7/8-14 and drops right into any standard single stage press, so you don't need special gear to get into it.

What the Type S Bushing Full Length Sizing Die Does

The big draw here is the interchangeable bushing system. The full length sizer sizes the entire case body and bumps the shoulder in one stroke while letting you dial in exactly how much the neck gets squeezed. Bushings come in .001 inch increments, so you can tune neck tension to your brass and your load instead of settling for whatever a one-size die gives you. The bushing is free to self-center on the case neck, which helps keep concentricity in check. There's also an adjustable decapping rod that lets you set how much of the neck length gets sized, handy for folks who want partial neck sizing or who turn their necks for uniformity.

Running the Competition Seating Die for 6.5 Creedmoor

The Competition Seating Die is the other half of the equation and it's a genuinely nice piece. It uses a spring-loaded sliding sleeve that supports the case and bullet in alignment before the bullet ever starts moving, which cuts down on runout. The micrometer adjusting head makes seating depth changes fast and repeatable, so chasing the lands or tweaking for a new bullet is a matter of counting clicks rather than guessing.

A Couple Things to Know Before You Order

This is a match-focused set, so bushings and the shellholder are sold separately. The 6.5 Creedmoor uses a #1 shellholder, and you'll want to measure your sized necks to pick the correct bushing. The set ships in a plastic storage case to keep everything organized on the bench. By removing the bushing and internal parts, the sizing die can also pull double duty as a body die.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 36446
  • UPC: 611760364464
  • Cartridge: 6.5mm Creedmoor
  • Die Set Type: Type S-Match Bushing Full Length
  • Number of Dies: 2
  • Dies Included: Bushing Full Length Sizer, Competition Seater
  • Thread Size: 7/8-14
  • Bushing Increments: .001 inch
  • Bushings Included: No (sold separately)
  • Shellholder Included: No (sold separately, uses #1)
  • Storage Case: Yes
  • Material: Case Hardened Steel
  • Bullet Diameter: 0.264 inch

What’s Included

  • Type S Bushing Full Length Sizing Die with decapping rod
  • Standard sizing button
  • Decapping pin retainer
  • Competition Bullet Seating Die with micrometer head and sliding sleeve
  • Plastic storage case

Frequently Asked Questions

Does the Type S-Match die set come with bushings?

No, the bushings are sold separately. This lets you pick the exact bushing size for your brass and preferred neck tension, available in .001 inch increments. Measure the neck diameter of a loaded round and subtract a couple thousandths to find your starting bushing.

Is a shellholder included with this 6.5 Creedmoor die set?

No, the shellholder is not included. The 6.5 Creedmoor uses a #1 standard shellholder, which you'll need to add if you don't already have one on the bench.

Can the Type S bushing die be used as a body die?

Yes. By removing the bushing and the internal parts, the full length sizing die will size the case body and bump the shoulder without touching the neck, effectively working as a body die when you need it.

What makes the Competition Seating Die worth it?

The Competition Seating Die uses a spring-loaded sliding sleeve that aligns the case and bullet before seating begins, which keeps runout low. It also has a micrometer adjusting head, so dialing in seating depth is quick and repeatable. Note that it is not intended for use with compressed loads.

Additional information

UPC

611760364464

Manufacturer

Manufacturer Part Number

36446

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Full Length Die Set 6.5 Creedmoor”