0
0

Redding Type S-Match Bushing Full Die Set – 243 Ackley Improved

UPC: 611760364204

$249.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Chambered a rifle in .243 Ackley Improved and want your loads to match the precision of the cartridge? This Redding Type S-Match Bushing Full Die Set is the tool built for exactly that. It pairs a Type S bushing full-length sizing die with Redding's Competition Bullet Seating Die, giving you fine control over two of the biggest variables in handloading: neck tension and seating depth. The whole set is cut for the 40-degree improved shoulder, so your reformed and fire-formed brass gets sized right every time.

What the Type S Bushing Sizer Brings to the Bench

The full-length sizing die resizes the entire case body while using interchangeable bushings to control exactly how much the neck gets worked. You pick the bushing diameter to dial in the neck tension you want, which cuts down on overworking the brass and helps extend case life. The decapping rod is adjustable too, so you can position the bushing to size only part of the neck when you're after that. Keep in mind the neck bushings and shellholder are sold separately, so you can match them to your brass and load.

Why Handloaders Reach for the Competition Seating Die

The seating die is where this set really earns its keep. It uses a micrometer head calibrated in .001-inch increments, so you can record a seating depth and return to it later without guesswork, which is a big help during load development or when switching bullets. A sliding sleeve captures the case and bullet in alignment before seating begins, and the precision-ground seating stem helps keep runout low for straighter, more consistent ammo.

Built for the .243 Ackley Improved Reloader

The .243 AI is a popular wildcat for folks who want a little more velocity out of the .243 case, and precise dies make a real difference with a fire-formed cartridge like this. Redding's steel construction and tight tolerances give you a die set that holds up round after round. It ships with complete instructions and the die box, ready to set up on a standard 7/8-14 press.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 36420
  • UPC: 611760364204
  • Cartridge: 243 Winchester Ackley Improved (40-Degree Shoulder)
  • Die Type: Type S-Match Bushing Full Length
  • Number of Dies: 2
  • Included Dies: Type S Bushing Full-Length Sizing Die, Competition Bullet Seating Die
  • Sizing: Full-length with interchangeable neck bushings
  • Seating Adjustment: Micrometer calibrated in .001-inch increments
  • Thread: 7/8-14
  • Material: Steel

What’s Included

  • One Redding Type S Bushing Full-Length Sizing Die with decapping rod, sizing button, and decapping pin retainer
  • One Redding Competition Bullet Seating Die with sliding sleeve and micrometer adjusting head
  • Complete instructions
  • Die box

Frequently Asked Questions

Are the neck bushings included with this 243 Ackley Improved die set?

No, the interchangeable neck bushings are sold separately. This lets you choose the exact bushing diameter to set the neck tension you want for your brass and bullet combination. The shellholder is also sold separately.

What's the difference between this Type S-Match set and a standard Redding die set?

The standard set uses a fixed sizing button to work the neck, while this Type S bushing sizer lets you swap bushings in .001-inch steps to control neck tension and reduce brass overworking. It also upgrades you from a standard seater to Redding's Competition Seating Die with a micrometer head and sliding sleeve for better seating consistency. If you're chasing precision and case life, the Type S-Match set is the step up.

Will this die set work for both fire-forming and loading my 243 Ackley Improved brass?

These dies are cut for the finished .243 AI case with its 40-degree improved shoulder, so they're made to size and load fire-formed brass. Most handloaders fire-form by running a .243 Winchester load in the AI chamber first, then use these dies for full reloading. The full-length sizing die will bump the shoulder and size the body of your formed cases properly.

Does the Competition Seating Die let me repeat a seating depth?

Yes, the micrometer head is calibrated in .001-inch increments so you can record a setting and dial right back to it later. That's especially handy during load testing or when you run different bullets in the same rifle. The sliding sleeve also aligns the case and bullet before seating to help keep runout low.

Additional information

UPC

611760364204

Manufacturer

Manufacturer Part Number

36420

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Full Die Set – 243 Ackley Improved”