Description
The Redding Type S Match Bushing Full Length Die Set is a two-die setup built for .308 Winchester handloaders who want to dial in every detail. You get a Type S bushing full-length sizing die and a Competition seating die, both machined to the standard that has made Redding a go-to name for precision reloading. The full-length die resizes the entire case body and sets the shoulder in one stroke while the interchangeable bushing handles the neck, so your brass headspaces clean and chambers smoothly round after round.
What the Type S Bushing Die Brings to the Bench
The heart of this set is the bushing system. Instead of squeezing the neck down and dragging it back over an expander ball, the bushing sizes the outside of the neck to exactly the diameter you choose. Bushings come in .001 inch increments and are sold separately, which lets you tune neck tension precisely for the brass and bullet you're running. Less working of the brass means better concentricity and noticeably longer case life. The bushing self-centers on the neck, and the adjustable decapping rod lets you position it to size only part of the neck length if that's your preference. There's also a decapping pin retainer included so folks who turn their necks can size without the button.
Dialing In the Competition Seating Die
The Competition seating die is where seating depth gets serious. A sliding sleeve supports the case and bullet in perfect alignment before the bullet ever touches the stem, which keeps runout to a minimum. The micrometer head adjusts in .001 inch increments with no detents, so you can fine-tune depth fast and come right back to your setting later.
A Few Notes Before You Load
This set uses standard 7/8-14 threads and drops into any common single-stage press. Keep in mind the shellholder and bushings are not included, so you'll want to grab the correct shellholder and at least one bushing sized for your brass. A handy trick is to measure the neck diameter of a loaded round and subtract .001 to .002 inches to pick your starting bushing.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number (MPN): 36155
- UPC: 611760361555
- Cartridge: .308 Winchester / 7.62 NATO
- Die Type: Type S Bushing Full Length Sizer + Competition Seating Die
- Number of Dies: 2
- Thread: 7/8-14
- Material: Heat-Treated Steel
- Bushing Increments: .001 inch (sold separately)
- Seating Adjustment: Micrometer, .001 inch increments
- Shellholder Included: No
- Bushings Included: No
- Storage Box: Included
- Country of Origin: United States
What’s Included
- Type S Bushing Full Length Sizing Die with decapping rod and standard sizing button
- Decapping pin retainer (for use in place of the button when neck turning)
- Competition Bullet Seating Die with sliding sleeve and micrometer head
- Hard plastic storage die box
Frequently Asked Questions
Does the 308 bushing full length die set come with bushings?
No, the bushings are sold separately so you can pick the exact size that matches your brass and bullet. Redding offers them in .001 inch increments in both heat-treated steel and titanium nitride. A good starting point is to measure the neck diameter of a loaded round and subtract .001 to .002 inches.
Is a shellholder included with this Redding Type S die set?
The shellholder is not included and needs to be purchased separately. For .308 Winchester you'll want the correct shellholder to fit your press. Once you have it, the dies use standard 7/8-14 threads and work in any common single-stage press.
What's the advantage of a bushing die over a standard full-length die?
A bushing die sizes the outside of the neck to exactly the diameter you choose, so you can set precise neck tension without dragging the brass back over an expander ball. That means less working of the brass, better concentricity, and longer case life. It also gives you the flexibility to fine-tune tension by swapping bushings.
Can the full length sizing die be used as a body die?
Yes. By removing the bushing and the internal parts, the Type S full length die can be run as a body die, sizing the case body and shoulder while leaving the neck untouched. That's handy if you're pairing it with a separate neck sizing step or a mandrel.





Reviews
There are no reviews yet.