Description
The 6.5×55 Swede is one of those cartridges that rewards careful handloading, and this Redding Type S Match Bushing Full Length Die Set is built for folks who want to squeeze every bit of accuracy out of it. This is the two-die set that pairs a Type S Bushing Full Length Sizing Die with Redding's Competition Seating Die. The full length die sizes the case body and bumps the shoulder in one pass while the interchangeable bushing handles the neck, so you get easy chambering and tight control over neck tension at the same time.
What the Type S Bushing Full Length Die Brings to the Bench
The heart of this set is the bushing system. Instead of a fixed neck diameter, you drop in a bushing sized to your exact brass and bullet combo, and they come in .001 inch increments so you can dial neck tension right where you want it. The bushing floats and self-centers on the case neck, which helps keep runout low and concentricity tight. The adjustable decapping rod lets you position the bushing to size only part of the neck if that is your preference, and the set ships with both a standard size button and a decapping pin retainer so you can run it with the button or go without if you turn or sort your necks. Pull the bushing and the internals and the die even doubles as a body die when you need it.
Why Reloaders Reach for This 6.5×55 Die Set
The Competition Seating Die is where this set earns its keep. The sliding sleeve captures and aligns the case and bullet before the seating stem ever touches it, and the micrometer head adjusts seating depth in .001 inch clicks so you can chase the perfect bullet jump and repeat it load after load. The result is straight ammo and consistent seating that shows up on target. Everything is machined, hand polished, and made in the USA to the tolerances Redding is known for.
Keep in mind the bushings and shellholder are sold separately, so pick up the bushing size that matches your brass and you'll be loading match-grade 6.5×55 in no time.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 36132
- UPC: 611760361326
- Caliber: 6.5x55mm Swedish Mauser
- Die Type: Type S Match Bushing Full Length Die Set
- Number of Dies: 2
- Thread Size: 7/8-14
- Bushing Increments: .001 inch
- Seating Die: Competition Seating Die with micrometer adjustment
- Country of Origin: United States
What’s Included
- Type S Bushing Full Length Sizing Die with decapping rod, standard sizing button, and decapping pin retainer
- Redding Competition Seating Die with sliding sleeve and micrometer adjusting head
- Die box
- Instructions
Frequently Asked Questions
Does this Redding Type S die set come with bushings?
No, the bushings are sold separately so you can match them to your specific brass and bullet combination. Redding bushings come in .001 inch increments, and Hornady, RCBS, Whidden, and Wilson bushings are also compatible. The shellholder is sold separately as well.
How do I figure out what bushing size I need for 6.5×55?
A common method is to measure the neck wall thickness of your cases with a ball or tubing micrometer, double that figure, and add the bullet diameter to get your loaded neck diameter. Then subtract about .001 to .002 inch to arrive at your bushing size. Many loaders also measure a loaded round at the neck and subtract .002 inch as a starting point.
What is the difference between this full length set and a neck sizing set?
This Type S Match Bushing Full Length set sizes the case body and bumps the shoulder while the bushing controls the neck, all in one stroke. That gives you reliable chambering along with adjustable neck tension. A neck-only set leaves the body untouched, which some loaders prefer for brass fired in a single rifle, but the full length approach is more forgiving across chambers.
Can the full length bushing die be used as a body die?
Yes. If you remove the bushing and the internal parts, the Type S full length die can be run as a body die to size just the case body and bump the shoulder. That makes it a handy do-it-all piece on the bench.




Reviews
There are no reviews yet.