Description
If you reload in real volume, hand-scrubbing brass gets old fast. The RCBS Ultrasonic Case Cleaner-2 takes that chore off your plate by dropping your empties into a big 6.3-quart stainless steel tub, adding cleaning solution, and letting ultrasonic waves do the scrubbing inside and out. It rapidly pulls tarnish, carbon buildup, and metal oxides out of your cases, including the spots your hands and brushes never reach. This is the 240VAC model (MPN 87061), so it's set up for EU, UK, and AUS power.
What Sets the Case Cleaner-2 Apart
The big upgrade over the original is size and power. The tank capacity is nearly double, and RCBS added a second ceramic heater and a second transducer to match. That dual setup keeps the heat even and spreads the ultrasonic waves uniformly across the whole tub, which means the brass at the bottom cleans as well as the brass up top. You also get a smaller stainless parts tub for little jobs when you don't need the full tank running.
Running the Ultrasonic Case Cleaner-2
Controls are about as simple as it gets. The LED display and programmable timer let you dial in anything up to 30 minutes of continuous cleaning, then walk away. When the cycle's done, the built-in drain hose empties the dirty solution without you tipping a heavy tub over the sink. Folks who've used it consistently point out how quiet it runs and how easy the drain valve makes cleanup and wipe-down.
Getting the Best Results
This unit handles more than brass. The stainless basket and dual transducers make it a handy way to degunk small gun parts too. Pair it with RCBS Ultrasonic/Rotary Case Cleaning Solution (sold separately) for the cleanest results. One thing worth knowing going in: ultrasonic cleaning strips fouling and leaves brass bright, but it doesn't polish to a mirror shine the way a media tumbler does. For most reloaders chasing clean, consistent cases, that's exactly the trade they want.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 87061
- UPC: 604544618563
- Power: 240VAC (International)
- Tank Capacity: 6.3 quarts
- Tank Material: Stainless steel
- Heaters: Dual ceramic heaters
- Transducers: Dual transducers
- Timer: Programmable up to 30 minutes
- Display: LED with keypad controls
- Drain: Built-in drain hose
- Cleans: Brass cases and gun parts
- Warranty: Limited one-year
What’s Included
- RCBS Ultrasonic Case Cleaner-2 unit (240VAC)
- Stainless steel parts basket
- Smaller stainless steel parts tub
- Drain hose
Frequently Asked Questions
What's the difference between the Case Cleaner-2 and the original RCBS ultrasonic cleaner?
The Case Cleaner-2 is the bigger, more capable version. It jumps to a 6.3-quart stainless tank, roughly double the original, and adds a second ceramic heater plus a second transducer. That means more brass per cycle and more even cleaning across the whole tub.
Does the Ultrasonic Case Cleaner-2 polish brass to a shine?
No, and it's not meant to. Ultrasonic cleaning removes fouling, carbon, tarnish, and metal oxides from inside and outside your cases, leaving them bright and clean. If you want a mirror polish, you'd run a media tumbler after, but for clean, reload-ready brass this does the job.
Do I need special cleaning solution for the RCBS Ultrasonic Case Cleaner-2?
You'll get the best results with a dedicated case cleaning solution rather than plain water. RCBS Ultrasonic/Rotary Case Cleaning Solution is sold separately and is formulated to cut tarnish and carbon while adding anti-tarnish protection. One quart of the concentrate makes a large batch of mix.
Will this 240VAC model work on standard US outlets?
No. This is the 240VAC international version (MPN 87061) built for EU, UK, and AUS power. If you're running standard North American outlets, you'll want the 120VAC version (MPN 87056) instead.





Reviews
There are no reviews yet.