0
0

Arisaka Defense Offset Optic Plate #11 Tall Height for Aimpoint Micro

UPC: 601557939753

$25.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Plate #11 in the Arisaka Offset Optic Mount system, cut specifically for tall-height setups in the 1.9 to 2.2 inch range. It's the piece that actually holds your red dot to the offset base, and this particular plate is machined to fit the Aimpoint Micro T1, T2, H1, and H2, the SIG Romeo 4 and Romeo 5 (not the 5X), Holosun HS403 (not the A model), HS503, HS515, and HS530, plus the Vortex Crossfire red dot. Picking the tall height is all about matching your primary optic. If your LPVO or scope sits in a 1.9 to 2.2 inch mount, this plate keeps your canted red dot at a similar height so your cheek weld stays consistent and the transition between optics feels natural.

How Plate #11 Fits Into the Arisaka Offset Mount

One thing worth knowing up front: this is the plate only, not the complete mount. A full offset setup needs the Arisaka Offset Optic Mount base plus one of these plates, so if you're building from scratch you'll want both. The beauty of the system is that the base and plates are interchangeable, which means you can swap plates down the road as you pick up different red dots instead of buying a whole new mount. The whole assembly can be set to a 35 or 45 degree offset by reversing the stem, and it runs fully ambidextrous for left or right side use.

Build Quality on the Tall Height Plate #11

Arisaka doesn't cut corners here. Each plate is CNC machined from 6061-T6 aluminum and finished with a MIL-A-8625 Type III hard coat anodize, the same hard-wearing treatment you'd expect on serious duty gear. It's made in the USA and ships with fresh screws, which Arisaka recommends running over your optic's factory hardware when the lengths work out. Keep the torque on the optic screws at or below 20 inch pounds and you're good to go.

Key Specifications

  • Manufacturer: Arisaka Defense
  • Manufacturer Part Number: OOM-P11
  • UPC: 601557939753
  • Plate Number: Plate #11
  • Plate Height: Tall (1.9" to 2.2")
  • Compatible Optics: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4 and 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530, Vortex Crossfire
  • Material: 6061-T6 Aluminum, CNC Machined
  • Finish: MIL-A-8625 Type III Hard Coat Anodized
  • Color: Black
  • Offset Positions: 35 or 45 degrees (set at base)
  • Max Optic Screw Torque: 20 in-lbs
  • Origin: Made in the USA

What’s Included

  • Offset Optic Plate #11 (tall height)
  • Two screws for mounting plate to base
  • Four screws for mounting optic to plate

Frequently Asked Questions

Does Plate #11 come with the complete offset mount?

No, this listing is for the plate only. A complete offset optic setup requires both the Arisaka Offset Optic Mount base and one optic plate like this one. If you already own the base, you just need this plate to attach your red dot.

Which red dots fit the Arisaka Plate #11?

This plate is cut for the Aimpoint Micro T1, T2, H1, and H2, the SIG Romeo 4 and Romeo 5 (not the 5X), Holosun HS403 (not the A version), HS503, HS515, and HS530, and the Vortex Crossfire red dot. It pattern-matches those footprints directly.

Should I get the tall height or standard height plate?

Match the plate height to your primary optic. If your scope or LPVO sits in a 1.9 to 2.2 inch mount, the tall height Plate #11 keeps your offset red dot at a similar height for a consistent cheek weld and smoother transitions. For lower mounts in the 1.5 to 1.8 inch range, you'd want the standard height version instead.

What is this plate made of and does it include screws?

Each Plate #11 is CNC machined from 6061-T6 aluminum and finished with a Type III hard coat anodize, and it's made in the USA. It ships with new screws for mounting both the plate to the base and the optic to the plate. Keep the optic screws at or under 20 inch pounds of torque.

Additional information

UPC

601557939753

Manufacturer

Manufacturer Part Number

OOM-P11

Color

Black

Reviews

There are no reviews yet.

Be the first to review “Arisaka Defense Offset Optic Plate #11 Tall Height for Aimpoint Micro”