0
0

Blackstone #30 Handpiece H.30 Flex Shaft Chuck-Style Handpiece

UPC: 098666715260

$91.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The #30 Handpiece is one of those tools that quietly earns its spot on the bench. Built by Blackstone (the folks behind Foredom), it's the chuck-style handpiece most people reach for when they want a rotary tool that does a little bit of everything. If you already run a flex shaft motor, this is the workhorse attachment that carves, grinds, polishes, deburrs, and drills without complaint. It measures 5-3/16" long and 1" in diameter and weighs in around 6 oz, so it stays light and easy to steer through long sessions.

What the #30 Handpiece Brings to Gunsmithing Work

The heart of this piece is a precision geared 3-jaw #0 chuck that accepts any shank size or drill bit up to 5/32" (4mm). That range covers most burs, mandrels, sanding drums, and polishing bobs you'd use for cleaning up feed ramps, breaking sharp edges, or bringing a mirror finish to small parts. Because it tightens like a miniature drill chuck, you're not locked into one shank diameter the way you would be with a collet or quick-change setup. If you're stepping up from a hobby rotary tool, your old accessories will likely still fit.

Smooth Running Without the Maintenance Headache

The #30 Handpiece runs on permanently lubricated, shielded ball bearings, so there's no oiling routine to remember. Compared to an air die grinder, a flex shaft setup runs quieter and lets you feel exactly what the bit is doing, which matters when you're working close on a receiver or slide. It's the same handpiece a lot of jewelers, knifemakers, and hobbyists trust for fine detail, which tells you plenty about its control and reliability.

An Attachment That Grows With You

One of the underrated perks here is the straight cylindrical body. It clamps into a whole family of Blackstone and Foredom bench tools, including the drill press, angle grinder attachment, belt sander attachment, and handpiece holder. That means the same #30 Handpiece can turn into a mini bench grinder or a small drill press depending on the job. Note that it's designed to run on key tip shafts, which is what most flex shaft machines use.

Key Specifications

  • Manufacturer: Blackstone
  • Manufacturer Part Number: H.30
  • UPC: 098666715260
  • Chuck Type: Precision geared 3-jaw #0 chuck
  • Accessory Capacity: Any shank or drill bit up to 5/32" (4mm)
  • Bearings: Permanently lubricated, sealed shielded ball bearings
  • Length: 5-3/16"
  • Diameter: 1"
  • Weight: 5.85 oz
  • Shaft Compatibility: Key tip shafts
  • Included Tool: HPCK-0 Chuck Key
  • Country of Origin: United States

What’s Included

  • #30 Handpiece (H.30 chuck-style)
  • HPCK-0 Chuck Key with molded plastic handle

Frequently Asked Questions

What size bits does the #30 Handpiece accept?

The geared 3-jaw #0 chuck grips any shank size or drill bit up to 5/32" (4mm) in diameter. That covers the vast majority of burs, mandrels, sanding drums, and polishing accessories used for gunsmithing and detail work. Because it clamps like a small drill chuck, you're not limited to a single shank size.

Does the #30 Handpiece need to be oiled or lubricated?

No. It uses permanently lubricated, sealed ball bearings that require no additional lubrication. That keeps maintenance out of the picture so you can focus on the work instead of a service routine.

Will the #30 Handpiece work with my flex shaft motor?

It's designed to run on key tip shafts, which are what roughly 85 percent of flex shaft machines use. If your motor has a standard key tip shaft, this handpiece connects right up. It's worth confirming your shaft type before ordering if you're unsure.

Can the #30 Handpiece be used with bench attachments?

Yes. Its straight cylindrical body fits a range of Blackstone and Foredom bench tools, including the drill press, angle grinder attachment, belt sander attachment, and handpiece holder. That lets you turn it into a mini bench grinder or small drill press when a project calls for it.

Additional information

UPC

098666715260

Manufacturer

Manufacturer Part Number

H.30

Reviews

There are no reviews yet.

Be the first to review “Blackstone #30 Handpiece H.30 Flex Shaft Chuck-Style Handpiece”