0
0

MEC 600 Slugger Short Kit 20 Gauge 3″ to 2-3/4″ Conversion

UPC: 098489036054

$39.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a MEC 600 Slugger in 20 gauge and want to load 2-3/4" shells without tearing down your press, this short kit is the clean way to get there. It lets you keep your loader dialed in for standard 3" hulls and switch over to shorter shells just by dropping in a machined plate. No fiddling with your base adjustments, no guesswork, just a quick swap when you want to change shell length.

What the 600 Slugger Short Kit Does

The kit raises the shorter shell up to the right height so your Slugger goes through its normal loading cycle like nothing changed. You leave the press set for your 3" shells, insert the plate, and you're loading 2-3/4" rounds. When you want to go back to the longer hulls, you pull the plate and you're right where you started. It's a simple, repeatable way to run two shell lengths off the same press.

Built for the 20 Gauge Slugger

This particular kit is cut for 20 gauge and is made specifically for the 600 Slugger reloader. It includes the riser plate and shell holder along with installation instructions, so setup is straightforward even if you're new to the Slugger platform. Everything is made in the USA to MEC's usual standard, which is a big part of why their presses and accessories hold up year after year.

For slug and sabot reloaders who like having flexibility on the bench, this is one of those small add-ons that quietly makes your setup more versatile. If you've already got the 20 gauge Slugger doing good work for your hunting loads, adding the short kit gives you room to work with different hull lengths without buying a second press.

Key Specifications

  • Manufacturer: MEC
  • Manufacturer Part Number: 921620
  • UPC: 098489036054
  • Gauge: 20 Gauge
  • Converts Shell Length: 3" to 2-3/4"
  • Compatible Press: MEC 600 Slugger
  • Type: Shell Length Conversion Kit
  • Country of Origin: Made in USA

What’s Included

  • Riser plate
  • Shell holder
  • Installation instructions

Frequently Asked Questions

What does the 600 Slugger Short Kit actually do?

It converts your 20 gauge MEC 600 Slugger press so you can load shorter 2-3/4" shells instead of 3" hulls. You leave the press adjusted for standard length shells and simply insert the machined riser plate to switch over. When you want to go back to 3" shells, just remove the plate.

Will this short kit work on other MEC presses?

This specific kit is designed for the 600 Slugger reloader. If you have a different MEC model like the 600 Jr, 600 Jr Mark V, Sizemaster, or Steelmaster, MEC makes separate short kits for those platforms. Make sure you're matching the kit to your exact press and gauge.

Is this the full 600 Slugger press or just the conversion kit?

This is the short kit conversion accessory only, not the press itself. It's meant to be added to a 20 gauge 600 Slugger you already own to give it the ability to load shorter shells. You'll need the Slugger press for this kit to be useful.

Is the 600 Slugger Short Kit hard to install?

Not at all. The kit comes with installation instructions, and the design is built around a simple drop-in plate that raises the shorter shell to the correct height. Most folks have it swapped in and running in just a few minutes.

Additional information

UPC

098489036054

Manufacturer

Manufacturer Part Number

921620

Caliber/Gauge

20 Gauge

Reviews

There are no reviews yet.

Be the first to review “MEC 600 Slugger Short Kit 20 Gauge 3″ to 2-3/4″ Conversion”