Description
Dialing in a consistent shot charge is half the battle when you're loading shotshells, and this is where the MEC 1-1/2 oz Lead Shot Charge Bar earns its keep. Marked 502-112, it's part of MEC's progressive series, which means it's built to run in MEC progressive shotshell presses. The bar itself handles the shot side of the equation, dropping a fixed 1-1/2 ounce payload of lead every stroke so you get the same load shell after shell.
How the 1-1/2 oz Charge Bar Fits Into Your Load
MEC splits the job between two parts. The charge bar sets your shot weight, and a removable powder bushing (sold separately) handles the powder drop. That setup lets you tune your recipe by swapping bushings while the bar keeps your shot payload locked at 1-1/2 oz. Match the bushing to the powder and load data you're running and you've got a repeatable combination you can count on.
What Sets This Lead Shot Charge Bar Apart
MEC machines these from anodized aluminum so they hold up to heavy use on the bench. There's also a soft insert built into the bar that helps cut down on shearing when you're pushing larger shot sizes or harder lead through it. That's a small detail that makes a real difference in metering accuracy and keeps your drops clean over long reloading sessions.
One thing worth flagging before you order: this is a lead shot bar, and MEC's lead and steel charge bars are not interchangeable. If you're loading steel, you'll want the steel-specific version instead. For anyone running lead through a MEC progressive and loading heavier payloads like this 1-1/2 oz drop, this bar is the straightforward, proven way to get there.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number: 502112
- UPC: 098489017725
- Series: 502 Progressive
- Shot Payload: 1-1/2 oz
- Shot Type: Lead
- Press Compatibility: MEC Progressive Shotshell Presses
- Material: Anodized Aluminum
- Insert: Soft insert to reduce shot shearing
- Powder Metering: Uses removable powder bushings (sold separately)
What’s Included
- MEC 1-1/2 oz Lead Shot Charge Bar (Progressive 502 Series)
Frequently Asked Questions
What press does this MEC 1-1/2 oz charge bar fit?
This is a 502 series bar, which is MEC's progressive line, so it's made to run in MEC progressive shotshell reloading presses. The series number stamped on the bar tells you the press type, with 502 being progressive and 302 being single stage. If you're running a single stage machine, you'll want the matching 302 series bar instead.
Does this charge bar meter both shot and powder?
The charge bar sets your shot drop, in this case a fixed 1-1/2 oz of lead. The powder side is handled by a removable powder bushing, which is sold separately. You pick the bushing to match the powder and load data you're using, and the bar keeps your shot weight consistent.
Can I use this lead shot bar for steel shot?
No. MEC lead and steel charge bars are not interchangeable. This bar is set up specifically for lead shot, so if you're loading steel you'll need a steel-designated bar.
Why does this bar have a soft insert?
The soft insert helps cut down on shearing when you're running larger shot sizes or harder lead through the bar. That keeps your drops cleaner and your shot charge more consistent over a long reloading session.




Reviews
There are no reviews yet.