Description
This is the MEC Progressive Stage Steel Shot Charge Bar set up to throw 1-1/4 ounces of steel in the #3 through #6 shot range. If you run a MEC progressive reloader and you're working up waterfowl or upland steel loads, this is the bar that handles the shot side of the equation. It drops a measured volume of shot into the wad column while your powder bushing takes care of the charge, so you get repeatable loads shell after shell.
How the 1-1/4 oz Steel Shot Charge Bar Works on Your Press
MEC marks their bars with two numbers. The 502 series means progressive, so this bar fits across MEC's progressive machines, and the 1-1/4 part tells you the shot weight it meters. Steel shot bars are bored and sized differently than lead bars, and the two are not interchangeable, so matching the bar to the shot material matters for clean, safe loads. This bar also accepts removable powder charge bushings, sold separately, which let you fine-tune your powder drop without swapping the whole bar.
Why the Soft Insert Matters on a Steel Shot Bar
Steel pellets are harder than lead, and larger shot can get pinched during the drop. This bar comes with a soft insert designed to keep those pellets from shearing as they pass through, which protects both your shot count and the bar itself. That's the detail that separates a steel-specific bar from a lead one, and it's why MEC keeps the two lines separate.
Matching the #3-#6 Range to Your Loads
The #3-#6 designation covers a popular slice of the steel shot world, from mid-size upland and small waterfowl pellets on up. If you're loading heavier BB and larger shot or moving into different payload weights, MEC offers other bars in the progressive steel lineup to cover those. For the reloader dialing in 1-1/4 ounce steel loads in that shot range, this is the bar built for the job, machined from anodized aluminum for a long service life on a hard-working press.
Key Specifications
- Manufacturer: MEC (Mayville Engineering Company)
- Manufacturer Part Number: 50211436
- UPC: 098489017558
- Series: 502 (Progressive Stage)
- Shot Material: Steel
- Shot Charge Weight: 1-1/4 oz
- Shot Size Range: #3 through #6
- Press Compatibility: MEC progressive reloaders
- Material: Anodized aluminum
- Powder Bushing: Accepts removable powder charge bushings (sold separately)
- Shear Protection: Soft insert to reduce shot shearing
What’s Included
- MEC 1-1/4 oz #3-#6 progressive stage steel shot charge bar with soft insert
Frequently Asked Questions
Will this steel shot charge bar fit my MEC progressive press?
Yes. As a 502 series bar, it's designed to function across MEC progressive presses. The 502 designation is what tells you a bar is built for progressive machines rather than single stage.
Can I use this steel shot bar with lead shot?
No. MEC makes separate bars for lead and steel, and they are not interchangeable. Steel pellets are harder and sized differently, so you'll want a dedicated lead bar for lead loads and this steel bar for steel loads.
Does this charge bar come with a powder bushing?
No, the powder bushing is sold separately. The bar accepts removable MEC powder charge bushings so you can adjust your powder drop to match your recipe, while the bar itself handles the 1-1/4 ounce shot charge.
What does the #3-#6 marking mean on this bar?
That's the range of steel shot sizes the bar is bored and tuned to meter. It covers shot from #6 up through #3. If you're loading larger pellets like BB, you'll need a different bar from MEC's progressive steel lineup.





Reviews
There are no reviews yet.