Description
The MEC 50258 is a 502 series progressive charge bar set up to throw a 5/8 oz payload of lead shot. It slides right into any MEC progressive press and handles the shot metering side of your reloads while a separate powder bushing takes care of the powder charge. Machined from anodized aluminum, it is the kind of part that holds up through long reloading sessions and a lot of cycles.
What the 50258 Charge Bar Does on Your Press
MEC charge bars drop shot by volume rather than by weight, so the 5/8 oz marking is a starting reference point. The actual weight that falls can shift slightly depending on the size, hardness, and density of the pellets you run. A quick check with a reloading scale after a few drops tells you exactly what your bar is throwing, and from there you are dialed in. One handy detail built into this bar is a soft insert that helps keep larger shot sizes and harder lead from shearing as the bar cycles.
Fitment and the Lead-Only Design of the 502 Series
The 502 series is MEC's progressive lineup, so this bar works across progressive machines like the Grabber and 9000 series. It is built specifically for lead shot. MEC makes separate bars for steel, and the two are not interchangeable, so keep this one on your lead loads only. The quick-change setup means you can pull one bar and drop in another when you want to change payloads, and it accepts MEC removable powder bushings (sold separately) so you can fine tune the powder side independently.
If you shoot a lot of light 5/8 oz loads for sub-gauge clays or lighter field work, having the right dedicated bar on hand saves you from fighting a universal bar every time you sit down to reload. It is a simple, no-nonsense part that does one job and does it reliably.
Key Specifications
- Manufacturer: MEC (Mayville Engineering Company)
- Manufacturer Part Number: 50258
- UPC: 098489013772
- Series: 502 (Progressive)
- Shot Payload: 5/8 oz
- Shot Type: Lead
- Press Type: MEC Progressive (Grabber, 9000, etc.)
- Material: Anodized aluminum
- Metering Method: Volumetric shot drop
- Powder Bushing: Accepts removable MEC powder bushings (sold separately)
- Special Feature: Soft insert to reduce shearing of larger or hard shot
What’s Included
- MEC 50258 502 Series progressive lead shot charge bar, 5/8 oz
Frequently Asked Questions
Which MEC presses does the 50258 charge bar fit?
This is a 502 series bar, which is MEC's progressive designation, so it works in MEC progressive presses like the Grabber and 9000 series. The 502 series is for progressive machines, while 302 series bars are for single stage presses. If you are running a progressive MEC, this one drops right in.
Does the 5/8 oz charge bar come with a powder bushing?
No, the charge bar handles the shot drop only, and the powder bushings are sold separately. It is designed to accept MEC removable powder bushings so you can set your powder charge independently of the shot payload. That lets you mix and match bushings to tune different loads.
Can I use this bar for steel shot?
No, this is a lead shot bar and should only be used with lead. MEC builds separate charge bars for steel shot, and the lead and steel versions are not interchangeable. Running steel through a lead bar is not how it is meant to be used.
Will the bar drop exactly 5/8 oz every time?
MEC charge bars meter shot by volume rather than by weight, so the 5/8 oz marking is a guideline. The actual dropped weight can vary a little based on shot size, hardness, and density. It is worth checking a few drops on a reloading scale so you know precisely what your bar is throwing with the shot you use.





Reviews
There are no reviews yet.