Description
The MEC 1/2 oz Lead Shot Charge Bar is the piece that sets your shot payload on MEC progressive presses. It meters shot by volume and drops a 1/2 oz charge into the wad column while the matching powder bushing handles your powder side. If you've been swapping loads or picking up a used press that came without the right bar, this is the part that gets you back to throwing clean, repeatable charges.
What the MEC 50212 Charge Bar Does
Think of the charge bar as the brain of the shot drop. The bar itself determines the shot weight, and the removable powder bushing (sold separately) determines the powder charge. That split setup is what gives MEC presses their flexibility, since you can keep one bar and change bushings to tune a recipe without buying a whole new bar every time. The 50212 is machined from anodized aluminum for smooth, slick cycling drop after drop.
Fitment and the Soft Insert on the 1/2 oz Lead Shot Bar
The 502 series is built for MEC progressive machines, including popular presses like the Grabber, 650, 9000 and Hustler. It is not the same as a 302 single stage bar, so make sure your press is a progressive before ordering. This bar also carries MEC's soft insert, which helps cut down on shot shearing when you're running larger or harder lead shot. One thing worth knowing: lead shot bars and steel shot bars are not interchangeable, so keep this one with your lead loads.
Getting an Accurate Shot Drop
Because charge bars meter by volume and not by weight, the ounce marking is a starting point rather than a guarantee. Shot size, hardness and antimony content all shift the actual weight that drops. Smart practice is to run a few drops and check them on a reliable scale, then you'll know exactly what your bar is throwing before you build a full batch. A couple minutes up front keeps your loads honest down the line.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number: 50212
- UPC: 098489013727
- Type: Charge Bar
- Series: 502 (Progressive)
- Shot Payload: 1/2 oz
- Shot Type: Lead
- Material: Anodized Aluminum
- Press Compatibility: MEC Progressive Presses (Grabber, 650, 9000, Hustler)
- Soft Insert: Yes, reduces shot shearing
- Powder Bushing: Accepts removable MEC powder bushings (sold separately)
- Quantity: 1
What’s Included
- One MEC 1/2 oz progressive lead shot charge bar (50212)
Frequently Asked Questions
Will this MEC charge bar work on my press?
This is a 502 series bar, which is designed for MEC progressive presses such as the Grabber, 650, 9000 and Hustler. It will not fit single stage machines, which use the 302 series instead. Confirm your press is a progressive before ordering.
Does the 50212 charge bar come with a powder bushing?
No, the powder bushing is sold separately. The bar sets your shot charge while the bushing you choose sets your powder charge, which lets you tune loads by swapping bushings instead of buying new bars. Pick the bushing that matches your recipe from MEC's bushing chart.
Can I use this lead shot bar for steel shot?
No. Lead shot and steel shot charge bars are not interchangeable, so this one should stay with your lead loads. If you reload steel, you'll want a dedicated steel shot bar.
Why isn't my shot drop exactly 1/2 oz?
Charge bars meter shot by volume rather than by weight, so the marked ounce figure is a guideline. Shot size, hardness and antimony content all affect the actual weight dropped. Run a few drops and check them on a scale to confirm what your bar is throwing.




Reviews
There are no reviews yet.