0
0

MEC 1-3/8 oz Lead Shot Charge Bar for Progressive Presses 502138

UPC: 098489013338

$24.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the MEC 1-3/8 oz lead shot charge bar, part number 502138, built for the 502 progressive series of presses. If you reload heavy field loads and want a repeatable shot charge without fuss, this is the piece that makes it happen. The charge bar is the part that meters your shot, dropping a consistent 1-3/8 ounces of lead every cycle so your payloads stay honest from the first shell to the last.

MEC machines these bars from anodized aluminum, so they hold up to years of handle pulls and shrug off the grit that comes with high-volume loading. A soft insert inside the bar helps keep larger shot sizes and harder lead from shearing as it drops, which means cleaner metering and less mess around your press. It's a small detail that makes a real difference when you're running bigger shot.

How the 1-3/8 oz Charge Bar Works on Your Press

The charge bar handles the shot side of the equation while a removable powder bushing, sold separately, meters your powder. That setup lets you dial in the exact powder-to-shot ratio your recipe calls for just by swapping the bushing. The quick-change design means you can pull this bar and drop in a different one in seconds when you switch loads.

Matching the 502138 Charge Bar to the Right MEC

This is a 502 series bar, which means it's made for MEC's progressive presses like the 650, Grabber, and 9000 family. Lead and steel charge bars are not interchangeable, so this one stays with your lead shot loads. If you're running a single-stage press such as a 600 Jr, 700, or Sizemaster, you'd want the 302 series version instead. Pairing the right series with your press keeps everything metering the way MEC intended.

Key Specifications

  • Manufacturer: MEC (Mayville Engineering)
  • Manufacturer Part Number: 502138
  • UPC: 098489013338
  • Shot Charge Weight: 1-3/8 oz
  • Shot Type: Lead
  • Press Series: 502 Progressive
  • Material: Anodized Aluminum
  • Design: Quick-Change
  • Insert: Soft insert to reduce shot shearing
  • Powder Metering: Accepts removable powder bushings (sold separately)

What’s Included

  • One MEC 1-3/8 oz lead shot charge bar (502138)

Frequently Asked Questions

Which MEC presses does the 502138 charge bar fit?

This is a 502 series bar, so it works with MEC's progressive presses including the 650, Grabber, and 9000 models. The 502 marking tells you it's the progressive version. If you run a single-stage press, you'd need the 302 series bar instead.

Does the charge bar meter powder too, or just shot?

The charge bar meters only the shot, dropping a set 1-3/8 oz of lead per cycle. Your powder is metered separately by a removable powder bushing, which is sold on its own. That combination lets you match the exact powder-to-shot ratio your load recipe calls for.

Can I use this charge bar with steel shot?

No. This bar is designated for lead shot, and MEC's lead and steel charge bars are not interchangeable. If you're loading steel, you'll want a bar made specifically for it.

Why does this MEC charge bar have a soft insert?

The soft insert helps keep larger shot sizes and harder lead from shearing as the shot drops through the bar. That gives you cleaner, more consistent metering and less spillage around the press. It's especially handy when you're loading bigger shot in a 1-3/8 oz payload.

Additional information

UPC

098489013338

Manufacturer

Manufacturer Part Number

502138

Reviews

There are no reviews yet.

Be the first to review “MEC 1-3/8 oz Lead Shot Charge Bar for Progressive Presses 502138”

Related Products