0
0

Hornady Match Grade .269″ Diameter Neck Sizing Bushing (594269)

UPC: 090255592696

$23.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Hornady's .269" diameter match grade neck sizing bushing, MPN 594269, one of the small interchangeable pieces that turns a Hornady Match Grade die into a precision tool. Rather than crushing the neck down and then dragging an expander ball back through it, a bushing sizes only the outside of the case neck to a set dimension. That means cleaner, straighter necks and brass that lasts longer because you're not overworking it every cycle.

What the .269 Match Grade Bushing Does at the Press

The bushing drops into a Hornady Match Grade neck or full-length die and floats into alignment, so it's self-centering and won't oversize the neck or pull it off-axis. Hornady offers these in .002" increments so you can fine-tune bullet tension to your load. The Match Grade neck die bumps the shoulder and sizes the neck with whatever bushing you install, while the full-length version sizes the body, bumps the shoulder, and sizes the neck in one pass. Either way, the .269 sizes the outside diameter of the neck to roughly .269", and your final neck tension depends on your brass thickness and bullet.

Picking the .269" Diameter Bushing for Your Load

The common way to land on the right size is to measure the outside neck diameter of a loaded round and subtract about .002" to .003" for your desired neck tension, which allows for brass spring-back. A .269 bushing generally lines up with 6mm cartridges, and shooters running tighter necks or lighter tension often keep a couple of sizes on hand. Since brass work-hardens over its life, having a bushing a thousandth or two on either side of your target is a smart move for keeping tension consistent as the brass ages.

Made in the USA from polished steel, this is a replacement or add-on piece for folks already running Hornady Match Grade dies. The bushing is sold on its own and is not included with the dies, so grab the right diameter for the neck tension you're chasing.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number (MPN): 594269
  • UPC: 090255592696
  • Bushing Diameter: 0.269 in
  • Type: Self-Centering Neck Sizing Bushing
  • Material/Finish: Polished Steel
  • Common Caliber Fit: 6mm
  • Compatibility: Hornady Match Grade Neck & Full-Length Dies
  • Size Increments Available: .002 in
  • Quantity: 1 bushing
  • Made in USA: Yes

What’s Included

  • One (1) Hornady .269" diameter match grade neck sizing bushing

Frequently Asked Questions

Does the .269" match grade bushing come with a Hornady die?

No, the bushing is sold separately. Hornady Match Grade neck and full-length dies use a separate, interchangeable bushing that isn't included with the die set. You'll want to pick up the diameter that matches the neck tension you're after.

How do I know if the .269 is the right bushing size for me?

Measure the outside neck diameter of a loaded round and subtract about .002" to .003" for your desired neck tension. That accounts for roughly a thousandth of brass spring-back. If a loaded round measures around .271" to .272", the .269 bushing is in the ballpark, though your exact result depends on brass wall thickness.

What cartridges does the .269 match grade bushing work with?

This diameter generally lines up with 6mm cartridges. The real answer comes from your own measurements, since neck wall thickness varies by brass brand. Measure a loaded round first and let that number guide you rather than assuming based on caliber alone.

Why use a bushing instead of a standard sizing die?

A standard die over-squeezes the neck and then drags an expander ball back through it, which stretches brass and can introduce runout. A bushing sizes only the outside of the neck to a set dimension, so you get straighter necks, more consistent bullet tension, and brass that holds up longer. It's a popular upgrade for precision and long-range handloaders.

Additional information

UPC

090255592696

Manufacturer

Manufacturer Part Number

594269

Shipping Weight

0.25

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade .269″ Diameter Neck Sizing Bushing (594269)”