Description
This is the .248 diameter bushing from Hornady's Match Grade system, the little piece that lets you take real control over neck tension when you resize your brass. It drops into your Hornady Match Grade die and does one job extremely well: sizing the case neck to the exact dimension you want, nothing more. Because it's self-centering inside the die body, it keeps everything concentric and stops you from overworking the neck the way a standard sizing die can.
The idea behind the bushing system is simple once you've run it. Rather than sizing the neck down further than needed and then letting the expander drag it back out, you pick a bushing that matches the neck tension you're after and let it do the work in one controlled step. That means less brass movement, longer case life, and the kind of repeatable concentricity that shows up on paper. Bushings in this line come in .002 inch steps, so you can fine-tune your setup instead of settling for whatever a one-size die gives you.
Picking the Right .248 Match Grade Bushing
Getting the size right is the whole game. A good starting point is to measure the neck diameter of a loaded or dummy round that chambers cleanly, then subtract about .001 inch and choose a bushing at or just under that number. This .248 falls in the .22 caliber range, so it's a common pick for loaders working up precision .22 centerfire rounds who want tighter, more consistent neck tension.
How the Match Grade Bushing Fits Your Setup
This bushing works in both the Match Grade full-length die and the neck sizing die, and it's interchangeable with the rest of the bushings in the Hornady lineup. If you already run the Match Grade system, swapping to a different tension is as quick as loosening the spindle lock and dropping in another bushing. Keep in mind the bushing is sold separately and isn't included with the dies, so you'll want to match it to your cartridge before your next range session.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 594248
- UPC: 090255592481
- Bushing Diameter: .248 in
- Caliber Range: .22 Caliber
- Type: Self-Centering Neck Size Bushing
- Compatibility: Hornady Match Grade full-length and neck sizing dies
- Sizing Increments: .002 in
- Quantity: 1 bushing
What’s Included
- One Hornady Match Grade .248 neck sizing bushing
Frequently Asked Questions
What does the Hornady Match Grade Bushing .248 do?
It sets the amount of neck tension when you resize your brass. The bushing sizes the case neck to a specific diameter in one self-centering step, which keeps you from oversizing the neck and overworking the brass. That translates to longer case life and more consistent concentricity.
Which dies does this .248 bushing fit?
It's made for the Hornady Match Grade system and works in both the full-length sizing die and the neck sizing die. It's also interchangeable with the other bushings in the Hornady lineup, so you can swap tensions quickly using the spindle lock.
How do I know if .248 is the right bushing size for me?
Measure the neck diameter of a loaded or dummy round that chambers well, then subtract about .001 inch and choose a bushing at or just under that figure. Since bushings come in .002 inch steps, having a size above and below your target on hand makes fine-tuning easier.
Does this bushing come with a Match Grade die?
No, the bushing is sold separately from the dies. Hornady lets you select the exact bushing your cartridge and neck tension require, so you'll want to pair this .248 with your Match Grade die before loading.




Reviews
There are no reviews yet.