0
0

Hornady Match Grade Neck Size Die, 223 Rem (544227)

UPC: 090255542271

$61.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Hornady's Match Grade New Dimension Neck Size Die chambered for 223 Remington, and it's the tool you reach for when you want more control over your reloads than a standard full-length die gives you. Instead of working the whole case, this die sizes the neck with an interchangeable bushing and bumps the shoulder only, leaving the body untouched. That means your brass holds the dimensions it got from your chamber, which pays off in better bullet-to-bore alignment and brass that lasts a lot longer through repeat loadings.

What Sets the Match Grade Neck Die Apart

The heart of this die is its self-centering bushing system. You pick the bushing that matches the neck tension you want, and it drops right into the die body. Hornady bushings come in .002 inch increments, so you can dial in exactly how much you squeeze the neck without over-working the brass. It's worth noting the bushings are sold separately, so you'll want to measure a loaded round's neck diameter and pick the right size to complete your setup. Good news if you've already got a bushing collection: these dies also accept bushings from RCBS, Redding, and Wilson.

Features Inside the 223 Rem Neck Die

This die carries over the refinements that make Hornady's match dies a favorite at the bench. You get a self-centering decap spindle with an O-ring tensioner that holds adjustments in place, plus the elliptical expander ball and headed decap pin shared with the Custom Grade line. The elliptical expander glides through the neck with less friction and less case-neck stretch than a traditional ball expander, and it's removable if you'd rather not inside-neck size at all. The internal finish is precision polished, and the whole thing threads into any press that takes standard 7/8-14 dies.

One thing to keep in mind: neck sizing is best suited for brass fired through bolt-action rifles. Semi-autos, lever guns, and pump actions generally need full-length resizing to feed and chamber reliably. If you're loading for a bolt gun and want to stretch your case life while tightening up your groups, this is a die that earns its spot in the kit.

Key Specifications

  • Manufacturer: Hornady
  • Cartridge: 223 Remington (.224)
  • Die Style: Match Grade Bushing Neck Sizing Die
  • Bushing Increments: .002 inch
  • Expander: Removable elliptical expander
  • Decap Spindle: Self-centering with O-ring tensioner
  • Decap Pin: Headed, replaceable
  • Thread: 7/8-14 (fits standard presses)
  • Material: Steel
  • Warranty: No-Risk Lifetime Warranty
  • Manufacturer Part Number: 544227
  • UPC: 090255542271

What’s Included

  • Match Grade neck sizing die body
  • Removable elliptical expander
  • Headed decap pin with retainer
  • Sure-Loc lock ring

Frequently Asked Questions

Does the Hornady Match Grade neck size die come with a bushing?

No, the bushings are sold separately and are required to size the neck. Measure the neck diameter of a loaded round, subtract about .001 inch, and pick a bushing at or just under that number as a starting point. Hornady offers them in .002 inch increments, and this die will also accept RCBS, Redding, and Wilson bushings.

What's the difference between this neck die and a full-length die?

The Match Grade Neck Die sizes the case neck with the installed bushing and bumps the shoulder only, leaving the case body untouched. A full-length die sizes the body, bumps the shoulder, and sizes the neck all at once. Neck sizing keeps your fire-formed brass closer to your chamber, which helps with alignment and stretches case life.

Can I use this die for brass fired in my AR-15?

Neck sizing is really meant for brass fired through bolt-action rifles. Semi-autos like the AR-15, along with lever and pump guns, usually need full-length resizing to chamber and feed reliably. For an AR, a full-length sizing die is the safer bet.

Will this die fit my press?

Yes. It uses standard 7/8-14 threads, so it screws into any single-stage or progressive press that accepts common reloading dies. You will need the correct shellholder for 223 Remington, which is not included with the die.

Additional information

UPC

090255542271

Manufacturer

Manufacturer Part Number

544227

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Neck Size Die, 223 Rem (544227)”