Description
If you run a Hornady Lock-N-Load Classic or 007 single-stage press with the automatic primer feed, this large primer tube is the piece that keeps the whole system flowing. It picks up large primers right out of your flip tray and holds them in line for the press, so you spend less time fumbling with individual primers and more time cranking out loaded rounds. It's sized for large primers only, covering both large rifle and large pistol.
How the Classic Press Primer Tube Earns Its Keep
The idea here is simple and it works well on the bench. You flip your primers face-down in a primer tray, press the pickup end of the tube down onto each one, and the tube grabs and stacks them for you. Because you're never pressing primers in with your fingertips, you cut way down on the chance of oil or grease contaminating the primer compound. That matters, since a contaminated primer is a dud waiting to happen.
Keeping Spares of the Large Primer Tube On Hand
Reloaders who load in volume tend to pre-load a few tubes before a session so the press never has to stop for a refill. Having a backup large primer tube on the shelf is also smart insurance. These are working parts that see a lot of cycles, and a spare means a dropped or worn tube never ends your reloading night early. It's a genuine Hornady part, so fit and function match the press exactly with no guesswork.
This is a single large primer tube, and it comes with the primer pickup already attached plus a cotter pin for assembly. If you load with small primers too, the small version is a separate purchase, so grab the size that matches what's on your bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 050004
- UPC: 090255500042
- Primer Size: Large (Large Rifle / Large Pistol)
- Compatibility: Lock-N-Load Classic and 007 Single-Stage Presses
- Function: Primer Pickup / Feed Tube
- Quantity: Single Tube
- Made in USA: Yes
What’s Included
- One large primer tube
- Primer pickup (attached)
- Cotter pin
Frequently Asked Questions
What presses does the Classic Press large primer tube fit?
This tube is built for the Hornady Lock-N-Load Classic and 007 single-stage presses that use the automatic primer feed attachment. It drops right in as a factory-correct replacement or spare. It is not the pickup tube used with the Lock-N-Load AP progressive press.
Does this work with both large rifle and large pistol primers?
Yes. The large primer tube handles large rifle and large pistol primers alike, since both share the same large diameter. For small rifle and small pistol primers, you'll want the small version, which is sold separately.
How do I load primers into the tube?
Turn your primers face-down in a primer flip tray, then press the pickup end of the tube onto each one until the tube fills up. Doing it this way keeps your fingers off the primers, which helps avoid oil or grease contaminating the primer compound. A flip tray is sold separately if you don't already have one.
Is this a single tube or a multi-pack?
This is a single large primer tube with the primer pickup attached and a cotter pin included. Many reloaders keep a couple on hand so they can pre-load tubes and keep the press running without stopping to refill. If you load in high volume, grabbing more than one is worth considering.



Reviews
There are no reviews yet.