0
0

Hornady 338 Lapua Magnum Full Length Sizing Die (046593)

UPC: 090255465938

$49.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading for the 338 Lapua Magnum, you already know this big case demands dies that can handle it without fuss. This is Hornady's Custom Grade full length sizing die, part number 046593, and it's the single sizing die rather than a full set. It resizes fired brass back down toward SAAMI minimum specs so your cases chamber reliably and load consistently, which is exactly what you want out of a long-range, large-bore cartridge like this one.

What Sets the 338 Lapua Full Length Die Apart

The heart of this die is Hornady's Elliptical Expander. Instead of a standard ball expander that can drag and stretch brass, the elliptical shape glides through the case neck smoother, cutting down on friction and neck stretch. That tapered design also lets you neck up to a larger caliber without needing a separate expander die, which is a nice touch if you work different cartridges off the same brass family. The internal profile is precision machined and polished to a smooth finish, so the large 338 case feeds through without sticking or hanging up.

Dialing In the 338 Lapua Mag Sizing Die

The Elliptical Expander and headed decap pin ride on Hornady's Zip Spindle, which has light threads cut into both the spindle and spindle lock. You can turn it for fine, incremental adjustments or just zip it up and down for bigger moves, then lock it down with no slippage once you've got it set. The decap pin is replaceable, so a bent or broken pin is a quick swap rather than a headache. Rounding it out is the Sure-Loc lock ring, which clamps around the full body of the die with even pressure and locks without the set screw biting into the threads.

This die threads into any standard 7/8-14 press station, so it drops right into whatever single-stage or progressive setup you're running. Built from heat-treated steel and backed by Hornady's lifetime guarantee against breaking or wearing out under normal use, it's the kind of tool you set up once and keep running for years of precision handloading.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 046593
  • UPC: 090255465938
  • Caliber: 338 Lapua Magnum (.338)
  • Die Type: Full Length Sizing Die
  • Series: Custom Grade
  • Number of Dies: 1
  • Thread Size: 7/8-14
  • Spindle: Zip Spindle with replaceable headed decap pin
  • Expander: Elliptical Expander
  • Lock Ring: Sure-Loc
  • Material: Heat-treated steel
  • Country of Origin: USA

What’s Included

  • Full Length Sizing Die (338 Lapua Magnum)
  • Elliptical Expander
  • Zip Spindle with headed decap pin
  • Sure-Loc lock ring

Frequently Asked Questions

Is the 338 Lapua Magnum full length die a complete set or just one die?

This is a single full length sizing die, part number 046593, not a two-die set. It handles resizing and decapping your fired 338 Lapua Mag brass. If you also need a seating die, you'll want to add that separately or look at a Custom Grade die set.

What press will this 338 Lapua die fit?

It uses the standard 7/8-14 thread, so it screws into just about any single-stage or progressive press on the market. Keep in mind the 338 Lapua is a large case, so a sturdy press and good case lube make the job a lot easier.

What is the Zip Spindle on this Hornady sizing die?

The Zip Spindle is Hornady's decap and expander assembly that has light threads cut into the spindle and lock. You can thread it for fine adjustments or pull it up and down for quick, larger moves, then lock it in place with no slippage. The headed decap pin is also replaceable if it ever bends or breaks.

Does the 338 Lapua full length die come with a shell holder?

No, a shell holder is not included with this die. The 338 Lapua Magnum uses the #43 shell holder, so you'll want to grab one if you don't already have it on your bench.

Additional information

UPC

090255465938

Manufacturer

Manufacturer Part Number

046593

Reviews

There are no reviews yet.

Be the first to review “Hornady 338 Lapua Magnum Full Length Sizing Die (046593)”