Description
If you're loading your own 450 Bushmaster, the sizing die is where consistency starts, and Hornady's Custom Grade full length version handles that first and most important step. It takes your fired brass and resizes the whole case back down to SAAMI minimum dimensions, which is exactly what you want for a straight-wall cartridge running through an AR platform or a bolt gun. Full length sizing gives you the kind of reliable chambering and extraction that matters when things need to feed right the first time, and it lets you shuffle brass between more than one rifle without headaches.
What Sets the 450 Bushmaster Sizing Die Apart
This die carries Hornady's Zip Spindle, a setup with light threads cut into both the spindle and the collet. You can make fine incremental adjustments by turning the spindle, or just zip it up and down for bigger moves, and once it's locked it stays put with no slippage. The hardened steel headed decapping pin knocks out spent primers cleanly as you size, so you're handling two jobs in one pull of the handle.
Setup and Press Compatibility
The die uses the standard 7/8-14 thread, so it threads right into any single stage or progressive press that takes standard dies. It ships with a Hornady Sure-Loc lock ring, which clamps around the full body of the die instead of biting into the threads with a set screw. That means you can pull the die and reinstall it later without losing your settings, which is a real time saver if you swap calibers on the same press.
A Note on Lubrication
Since the 450 Bushmaster is a long straight-wall case, this is a steel sizing die and it needs case lube to run smooth and keep brass from sticking. A quality sizing wax or spray lube does the trick. Hornady backs the Custom Grade line with a guarantee against breaking or wearing out under normal use, so this is a die you buy once and keep on the bench for the long haul.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 046422
- UPC: 090255464221
- Product Line: Custom Grade New Dimension
- Caliber: .450 Bushmaster
- Bullet Diameter: .452
- Die Type: Full Length Sizing Die
- Die Material: Steel (case lube required)
- Thread Size: 7/8-14
- Spindle: Zip Spindle
- Lock Ring: Sure-Loc
- Decapping Pin: Hardened steel, headed
- Number of Dies: 1
- Shell Holder: #1 (sold separately)
What’s Included
- Hornady 450 Bushmaster full length sizing die
- Sure-Loc lock ring
- Hardened steel headed decapping pin
- Zip Spindle assembly
- Plastic storage box
Frequently Asked Questions
Does the 450 Bushmaster sizing die need case lube?
Yes. This is a steel full length sizing die, and because the 450 Bushmaster is a long straight-wall case, there's no carbide version that would let you skip lube. Use a good sizing wax or spray lube on your brass before running it through to keep things smooth and prevent stuck cases.
What shell holder do I need with this die?
The 450 Bushmaster uses a #1 shell holder. It is not included with the die, so you'll want to pick one up separately if you don't already have it on your bench.
Will this die fit my press?
It uses the standard 7/8-14 thread, so it threads into any single stage or progressive press built for standard dies. That includes Hornady presses as well as other common brands on the market.
Is this a complete die set or just the sizing die?
This is the single full length sizing die only, part number 046422. If you need to seat bullets and crimp as well, you'll want the complete Hornady Custom Grade die set or the individual seating, expander, and crimp dies to round out your loading setup.


Reviews
There are no reviews yet.