Description
Reloading the big .452 cartridges just got simpler. This Hornady Custom Grade seating die covers both 460 S&W and 450 Bushmaster out of one body, since both rounds run the same .452 bullet diameter and share Hornady part number 044721. If you shoot either caliber, or both, this is the piece that handles the seating step on your single stage or progressive press.
What the 460 S&W / 450 Bushmaster Seating Die Brings to the Bench
The heart of this die is Hornady's in-line seating system. A floating bullet alignment sleeve and floating steel seating stem hold the bullet, case neck, and stem in alignment inside the sleeve before the bullet ever enters the case. That pre-alignment is what keeps bullets from going in crooked, which translates to straighter rounds and better consistency on target. A seater adjustment screw dials in your exact seating depth, and the die has a built-in crimper to lock the bullet in place.
Set Up and Finish on the 460 S&W / 450 Bushmaster Die
The die uses a standard 7/8-14 thread, so it threads into any common reloading press. It ships with a Hornady Sure-Loc lock ring, a split-ring design that clamps evenly around the die without a set screw digging into the threads, which makes repeat setups a breeze. The locking retainer ring pops off in seconds when you want to pull the stem and sleeve for cleaning. One thing worth knowing when you set it up: the alignment sleeve has a roll-crimp shoulder built in, so take your time dialing in depth and crimp to avoid overdoing contact with the case mouth.
Hornady builds these from heat-treated steel with one of the smoother internal finishes you'll find, and they back the Custom Grade line with their lifetime no-risk warranty. For anyone loading heavy .452 bullets for a 460 S&W revolver or a 450 Bushmaster rifle, this die earns its spot in the kit.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 044721
- UPC: 090255447217
- Product Line: Custom Grade New Dimension
- Die Type: Bullet Seating Die
- Cartridge Compatibility: 460 S&W / 450 Bushmaster
- Bullet Diameter: .452 in
- Thread Size: 7/8"-14
- Crimp: Built-in crimper
- Seating System: Floating alignment sleeve and floating steel seating stem
- Material: Heat-treated steel
- Lock Ring: Hornady Sure-Loc
- Warranty: Lifetime No-Risk
What’s Included
- Hornady Custom Grade seating die (460 S&W / 450 Bushmaster)
- Sure-Loc lock ring
- Instruction sheet
Frequently Asked Questions
Does this die really work for both 460 S&W and 450 Bushmaster?
Yes. Both cartridges use the same .452 bullet diameter, so Hornady sells one seating die under part number 044721 for both. It's the identical die whether you're loading 460 S&W or 450 Bushmaster.
Does the 460 S&W / 450 Bushmaster seating die include a crimp?
It has a built-in crimper integrated into the die, so you can seat and crimp if you choose. When setting it up, be mindful of the roll-crimp shoulder in the alignment sleeve and dial in your depth carefully to avoid too much contact with the case mouth.
Will this die fit my press?
It uses the industry-standard 7/8-14 thread, so it threads into any standard single stage or progressive reloading press. A compatible shell holder is needed for the cartridge you're loading and is sold separately.
What makes the Hornady seating die different from a basic one?
The floating bullet alignment sleeve and floating steel seating stem pre-align the bullet and case neck before the bullet enters the case, which helps prevent crooked seating and bullet base deformation. That alignment is what delivers more consistent, straighter loaded rounds.




Reviews
There are no reviews yet.